Parts for your 2006 Daihatsu Terios-Pedal pads

2006 Daihatsu Terios pedal pads – what they do and how to look after them

Pedal pads are absolutely relevant on the 2006 Daihatsu Terios (J200/J210 series). The Daihatsu workshop manual and the Daihatsu/Toyota electronic parts catalogue for the J200-series list rubber pedal pads for the brake pedal (and the clutch pedal on manual models). The accelerator is typically a moulded pedal without a removable rubber pad. Owner’s manual inspection notes and WOF/RWC guidance also call out pedal surface condition, confirming these pads are a service item.

On this Terios, the pedal pads provide a grippy, durable interface between the driver’s shoe and the metal pedal arm. Their job is simple but critical: keep the foot planted, especially in the wet or when hopping in with sandy, muddy, or oily soles. Over time, the rubber hardens, smooths off, or cracks. That’s when slipping risk jumps and inspections can flag it at WOF (NZ) or during a roadworthy (AUS).

Good practice is to check pedal pads at each service interval or every 10,000–15,000 kilometres. Look for polishing, cracks, missing chunks, or pads that have gone shiny. If the pattern is worn flat or the pad moves on the pedal, it’s time to replace. Choose OEM or OEM-quality EPDM rubber so it resists oil, ozone, and heat. Universal “dress-up” covers aren’t recommended, they can foul pedal movement or reduce grip.

• Replacement is quick: pull the old pad off the metal pedal face.
• Warm the new pad in hot water for a minute to soften.
• Hook the top lip first, then work the edges around until fully seated.

After fitting, press the pedal a few times and make sure the pad doesn’t twist. On manuals, confirm clutch pedal free play hasn’t changed and the mat isn’t interfering. On autos, ensure the brake pedal returns cleanly and the stop-lamp switch operation is unaffected. Avoid adhesives or lubricants on the pad—they reduce grip.

If the bare metal pedal face shows rust after removing a torn pad, clean it up and treat it before fitting the new rubber. Keeping mats clipped in place and shaking off grit before driving helps the pads last longer. Fresh, grippy pads keep the Terios safe and compliant, and they cost peanuts compared with the peace of mind they bring.

Popular questions

Which pedal pads does the 2006 Terios use?
The brake pedal uses a removable rubber pad on all models. Manual versions also have a removable clutch pedal pad. The accelerator is usually a fixed plastic pedal without a separate rubber pad. Check the J200-series parts catalogue or your VIN to confirm the exact pad style.

How often should pedal pads be replaced?
There’s no fixed kilometre limit. Replace when the tread is worn smooth, cracked, or loose. Many owners find pads last several years, but frequent wet-weather driving or gritty footwear can speed up wear. Inspect them at each service.

Are universal pedal covers a good idea?
They’re not recommended. Some covers reduce grip, add thickness that can snag on mats, or interfere with pedal travel. Stick with Terios-specific pads made from quality EPDM rubber for proper fit and safety.