Parts for your 2005 Honda Elysion-Gas struts

2005 Honda Elysion Gas Struts — Purpose, Care and When to Replace

Technical sources including Honda’s Electronic Parts Catalogue for RR1–RR4 Elysion models and the Body/Tailgate sections of the Honda Service Manual confirm the 2005 Honda Elysion is fitted with gas‑pressurised tailgate stays (lift supports). The bonnet uses a prop rod rather than gas struts. So, for this model, “gas struts” are absolutely relevant to the rear tailgate.

On a 2005 Honda Elysion, the tailgate gas struts do the heavy lifting. They counterbalance the weight of the big rear door, helping it rise smoothly and stay up without drifting or slamming. When they’re healthy, the tailgate feels light and controlled. When they’re tired, you’ll notice hesitation, uneven lift, or the gate slowly sinking — not ideal on a windy day or when loading the pram and the groceries.

As part of routine servicing, it’s smart to give the gas struts a quick check. Look for oil mist around the shaft seals, listen for stiction or squeaks, and test holding power by leaving the tailgate fully raised for a minute. Temperature affects performance (colder weather can make weak struts show their age), so don’t ignore seasonal changes in behaviour.

• Plan on replacing in pairs for balanced operation and even wear.
• Support the tailgate with a prop or a mate before removal — they’re heavier than they look.
• Most automotive gas struts are sealed and not designed to be re‑gassed, replacement is the go‑to fix.
• Avoid gripping or greasing the polished shaft — contamination can damage seals.
• Confirm fitment by VIN or build code, trims with power tailgate or different glass/tailgate assemblies may use specific stays.

Replacement is straightforward: carefully pry back the retaining clips at each end, pop the old strut off the ball studs, and click the new one on (clips facing out for access). A tiny dab of suitable lubricant on the ball joint (not the shaft) can prevent squeaks, but keep it off the seal area. Always follow torque and safety notes in the Honda service information for the tailgate stay and hinge areas.

Done right, fresh gas struts bring back that smooth, one‑handed lift and solid hold — exactly how an Elysion tailgate should feel.

FAQs

How do I know my Elysion’s tailgate gas struts need replacing?
If the tailgate drops, won’t stay up, rises unevenly, or needs an extra shove to open, the struts are fading. Oil weep on the shaft or end fittings is another giveaway. Cold mornings often make weak struts show their true colours.

Can the gas struts be re‑gassed, or should they just be replaced?
On this model, the tailgate struts are sealed units. Re‑gassing isn’t standard practice, replacing them as a pair is the reliable, cost‑effective fix and restores proper lift and hold.

Are there different struts for different Elysion trims?
Yes, variations can exist by trim, market, and whether the vehicle has a power‑assisted tailgate. Always match by VIN/build code or the original part markings to get the correct length, force rating, and end fittings.