Your Selected Vehicle
Parts for your 2005 Honda Accord-Steering bushes
Explore 4WD & Adventure
2005 Honda Accord steering-bushes: what they do and when to replace them
Yes, the 2005 Honda Accord does use steering bushes. Technical references confirm it: the Honda Factory Service Manual for the 2003–2007 Accord (CM/CL series, including Accord Euro) and Honda’s Electronic Parts Catalogue show the rack-and-pinion steering gear mounted to the front subframe with rubber mounting bushes/insulators and brackets. Aftermarket fitment guides from well-known brands like SuperPro and Energy Suspension also list replacement steering rack bushes for these models, which backs up their presence on both the standard Accord and the Accord Euro of the same era.
On this Accord, the steering bushes sit between the steering rack and the subframe. Their job is to keep the rack securely located and aligned while soaking up vibration and noise. Good bushes help the car track straight, keep on‑centre feel tidy, and reduce kickback through the wheel. Over time, rubber can harden, crack, or soften—especially with heat, age, oil contamination from a weepy engine or power steering line, and the odd run‑in with potholes and corrugations common on Aussie and Kiwi roads.
- Common signs they’re tired: a clunk over bumps, vague on‑centre feel, wandering at highway speeds, kickback through the wheel, and visible rack movement if someone rocks the steering while you watch under the bonnet.
For servicing, it’s smart to inspect the steering-bushes every 40,000–60,000 km or whenever the front end is apart. Look for cracking, deformation, or oil‑soaked rubber, and check the rack brackets and fasteners. If replacement’s needed, expect 1.5–3.0 hours depending on tools and corrosion. The usual routine is to support the subframe as needed, remove the rack brackets, press or pry out the old bushes, and fit new ones—rubber OE‑style to keep it quiet, or polyurethane for a firmer, more direct feel. Re‑torque mounts at normal ride height and book a wheel alignment afterwards to keep steering feel and tyre wear in check.
Note: on some Accords Honda doesn’t supply the rack mount bushes separately in the dealer parts stream, preferring a complete rack assembly, however, many reputable aftermarket suppliers do offer direct‑fit bush kits. A good workshop will confirm what’s available for the specific VIN and whether the existing brackets and sleeves are reusable.
FAQs
Do all 2005 Honda Accords have steering-bushes?
They do. Both the CM-series Accord and the CL-series Accord Euro use a rack-and-pinion secured to the subframe with rubber bushes/insulators and brackets, as shown in the Honda Factory Service Manual and parts catalogue for 2003–2007 models.
Can the bushes be replaced without changing the whole steering rack?
Often, yes. Many workshops replace the rack mounting bushes on their own. While Honda may not always list the bushes separately, quality aftermarket kits are widely available. If a particular rack uses non-serviceable bushings or the brackets are damaged, a complete rack may be the practical path.
How often should steering-bushes be checked or replaced?
Have them checked at regular services (every 10,000–15,000 km) and more thoroughly every 40,000–60,000 km. Replace them when there’s play, noise, or visible deterioration. After fitting new bushes, get a wheel alignment to protect tyres and restore precise steering.