Parts for your 2005 Ford Falcon-Pedal pads

2005 Ford Falcon pedal pads — what they do and when to replace them

Pedal pads absolutely are used on the 2005 Ford Falcon. Ford’s BA/BF Falcon Workshop Manual and the Ford Microcat electronic parts catalogue specify removable rubber pads on the brake pedal (auto and manual) and on the clutch pedal (manual). Accelerator pedals on these models are a moulded assembly without a separate rubber pad. Aftermarket catalogues used across AU/NZ (e.g., common listings for BA/BF Falcon brake and clutch pedal rubbers) back this up, so they’re a relevant service item.

On a 2005 Falcon, the pedal pads are simply the rubber covers that slip over the metal pedal arms. Their job is dead simple but critical: grip. The rubber tread gives the driver confident, slip-free control of the brake and clutch, especially in wet boots or on a muddy worksite. They also cushion the foot and help meet safety and roadworthy expectations in Australia and New Zealand.

As part of routine servicing, it’s worth checking pedal pads for hardening, glazing, cracking, or chunks missing. If the surface has gone shiny and slippery, or the edges are torn and the pad no longer hugs the metal plate, it’s time to swap them. A badly worn pad can lead to a WOF or roadworthy fail, and more importantly, a moment of lost grip when braking.

Replacement is quick backyard stuff and doesn’t need special tools:

1. Peel the old pad off the pedal plate, starting at one corner.
2. Clean the bare pedal with mild detergent, avoid solvents that attack rubber.
3. Warm the new pad in hot water for a minute to make it supple.
4. Work the pad on from the bottom edge and ensure the lip seats fully around the metal.

For autos, the brake pedal uses a wider pad, manuals have both a brake and a separate clutch pad. Make sure you order the correct style for transmission. Don’t dress pedal rubbers with silicone or greasy cleaners—keep them clean and dry. During regular services, a quick scrub with a soft brush and soapy water keeps the tread biting well.

If a driver’s boots keep slipping, the pad is likely past it. At the price of a couple of coffees, a fresh set of pedal pads restores that sure-footed Falcon feel.

Popular questions

Does a 2005 Ford Falcon have pedal pads from factory?
Yes. The BA/BF platform uses removable rubber pads on the brake pedal (all transmissions) and on the clutch pedal (manuals). The accelerator pedal is a one-piece assembly without a separate rubber pad.

How often should pedal pads be replaced?
There’s no fixed interval. Inspect at every service and replace when the surface is hard, smooth, cracked, or the pad no longer grips the pedal plate. High-mile couriers and tradies may need them more often due to wear and wet conditions.

Are auto and manual pedal pads the same?
No. Auto models have a wider brake pedal pad, while manuals have a narrower brake pad plus a separate clutch pad. Check transmission and model year when ordering to ensure proper fit.