Parts for your 2005 Daihatsu Yrv-Head gasket

2005 Daihatsu YRV head gasket

Yes, the 2005 Daihatsu YRV uses a head gasket. This is clearly documented in Daihatsu’s YRV M200/M201/M211 Workshop Manual (Engine Mechanical – Cylinder Head), the K3-VE/K3-VET Engine Repair Manual, and the Daihatsu Electronic Parts Catalogue, which lists specific head-gasket part numbers for the K3-VE and K3-VET engines (e.g., 11115-97201/97213). Those factory sources confirm a multi-layer steel (MLS) head gasket fitted between the cylinder head and block on the 1.3-litre engines used in this model.

On the 2005 Daihatsu YRV, the head gasket does a big job in a very thin space. Sandwiched between the alloy cylinder head and the block, it seals three critical circuits at once: high-pressure combustion gases, engine coolant, and engine oil. That airtight seal keeps compression up for proper power and efficiency, while stopping coolant or oil from sneaking into places they shouldn’t. The K3-VE and turbocharged K3-VET rely on this MLS gasket’s precise clamping and surface finish to cope with heat cycles, boost (where fitted), and day‑to‑day driving across Aussie and Kiwi conditions.

While a head gasket isn’t a routine “replace every X kilometres” item, it lives or dies by cooling-system health and avoiding overheating. Sensible servicing helps it last the distance:

• Use the correct long-life coolant and keep the mix right