Your Selected Vehicle
Parts for your 2004 Mitsubishi Pajero-Tail lights
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9 - 33 Volt LED Rear Stop/Tail And Direction Indicator Lamp Kit (Red/Amber) - 94526
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflex Reflector 2 Pack - 151BAR2
Fitment Notes:
Hella DuraLED Combi-S Heavy Duty 12/24V LED Stop/Tail/Indicator Lamp with6M Lead - 23786MBULK
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
Fitment Notes:
LED Autolamps 12/24V 16 LED Stop/Tail Indicator Lamp Black Bracket Blister Pack - 201BSTIM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Fitment Notes:
LED Autolamps 12V 82 Series Stop/Tail/Indicator/Reverse Lamp Black Bracket - 82BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Fitment Notes:
Narva 9-33 Volt L.E.D Reverse Lamp White with Red L.E.D Tail Ring and Black Base - 94312
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
LED Autolamps Stop/Tail Indicator With 18 Square LEDs Multi Volt Blister - 35ARM
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse With Reflectors And 500mm LP Cable - SO283ARWM2LR12
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Flood Pattern 4 LED Work Light - LEDWORK-C4-FLOOD
Fitment Notes:
Repco Wireless 1.5M Trailer Board With Rear Combination Lights 20 Metre Range - RTBW
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97010-1-D
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97000-1/4
Fitment Notes:
Understanding the Tail-Lights on the 2004 Mitsubishi Pajero
The 2004 Mitsubishi Pajero, a popular SUV known for its rugged capability and reliability, comes fitted with tail-lights as standard equipment. Tail-lights are essential components of any road vehicle, including this Pajero model, and they play a crucial role in safety and communication on the road. These lights are located at the rear of the vehicle and help other drivers see the car in low-light conditions or during adverse weather, minimising the risk of accidents.
Tail-lights serve multiple functions. Primarily, they illuminate when the headlights are on, signalling the vehicle's presence to those behind it. When the driver applies the brakes, the tail-lights brighten to alert following drivers that the vehicle is slowing down or coming to a stop. They also house indicators or turn signals that flash to show intended changes in direction, and some models incorporate reverse lights to indicate when the vehicle is backing up.
On the 2004 Mitsubishi Pajero, the tail-lights are integrated into the rear light clusters on both sides of the vehicle. The design is both functional and stylish, complementing the SUV's sturdy aesthetic while ensuring maximum visibility. The lights use standard incandescent bulbs, although some owners may choose to upgrade to LED replacements for increased brightness and longevity. Regardless of the bulb type, maintaining fully operational tail-lights is essential for road safety and compliance with Australian vehicle regulations.
When it comes to tail-light maintenance and replacement on the 2004 Pajero, regular checks are a smart move. Owners should inspect their tail-lights periodically, ideally during routine servicing or before long trips, to ensure all aspects of the rear lighting are working properly. This includes the tail-lights, brake lights, turn signals, and reverse lights. Even a single burnt-out bulb can reduce visibility and increase the risk of rear-end collisions, not to mention it could attract a fine from local law enforcement.
Replacing a tail-light bulb on the Pajero is generally straightforward and can often be done at home with basic tools. The process usually involves accessing the light cluster by opening the rear tailgate and removing screws or clips that hold the assembly in place. It is important to be gentle to avoid damaging the plastic or electrical connections. Once the assembly is out, the old bulb can be twisted or pulled out depending on the design, and the new bulb inserted. Remember to use bulbs specified for the Pajero to ensure proper fit and function.
Another key point for maintenance is keeping the tail-light lenses clean. Dirt, mud, and grime can build up on the rear of the Pajero, especially if it is frequently driven off-road or in harsh conditions. Clean lenses help maintain the brightness of the lights and ensure they are clearly visible to other drivers. Using a soft cloth and mild detergent is usually enough to keep the lenses looking clear and shiny.
It is also worth checking for any cracks or damage to the tail-light assemblies. Collisions or impacts can crack the lens or housing, allowing moisture to enter and cause bulbs to fail prematurely or corrode the electrical contacts. In such cases, replacing the entire tail-light unit might be necessary. Genuine Mitsubishi parts or quality aftermarket replacements designed specifically for the 2004 Pajero ensure optimal performance and compatibility.
For owners wanting to go the extra mile, fitting LED tail-lights can offer benefits like greater brightness, quicker illumination when braking, and lower power consumption. LEDs also tend to last longer than traditional bulbs, meaning less frequent replacement. However, it is essential to verify that any aftermarket lights comply with local Australian standards and regulations to avoid any legal issues.
Tail-lights on the 2004 Mitsubishi Pajero are not just handy visibility features, they are an absolute must for safe driving. Whether cruising down a highway or tackling tricky terrain in the bush, making sure these lights are performing well protects the driver, passengers, and everyone else on the road. Regular checks, timely bulb replacements, and clean lenses all contribute to keeping the rear lighting system in top-notch condition.
Overall, tail-lights are highly relevant and very much used on the 2004 Mitsubishi Pajero. They contribute to legal compliance, safe driving, and the overall vehicle look. Paying attention to these details ensures that your Pajero remains roadworthy and safe for any adventure ahead.