Parts for your 2004 Honda Elysion-Pedal pads

2004 Honda Elysion Pedal Pads — What They Do and When to Replace

Pedal pads are indeed fitted to the 2004 Honda Elysion. Technical references that confirm this include the Honda Electronic Parts Catalogue (Elysion RR1/RR2, 2004–2006), which lists a serviceable “Pad, Brake Pedal” under the brake control/pedal diagram, and the 2004 Honda Elysion Service Manual, Brake System – Pedal Inspection, which directs technicians to check pedal pad wear and condition during routine servicing. JDM Honda parts catalogues used by dealers (e.g., Honda EPC/Microcat/PartsLink24) all show a replaceable brake pedal rubber pad for automatic variants, with clutch pedal pads applicable where a manual transmission is fitted.

On a 2004 Honda Elysion, the pedal pads provide grippy, high-friction surfaces on the brake (and clutch, if manual) so the driver’s footwear doesn’t slip, especially in wet conditions. They also add a bit of cushioning and help protect the metal pedal arm from wear. On most Elysion models with an automatic, the main wear item is the brake pedal rubber pad, the accelerator typically uses a hard plastic tread that isn’t replaced separately unless the whole pedal assembly is being changed.

As part of regular servicing, the pedal pads deserve a quick once-over. If the rubber has gone hard and shiny, shows cracking, has torn edges, or the tread pattern is worn flat, it’s time to swap it. A badly worn or missing pad can lead to a WOF (NZ) or RWC (AU) fail because it’s a clear safety risk. Replacement is simple and inexpensive, so it’s a smart preventative fix.

• Inspection tips: check grip with a thumb press, look for splits around the lip, and confirm the pad sits fully seated on the pedal plate.
• Cleaning: use mild soapy water and a soft brush. Avoid silicone dressings or tyre shine on pedals — they make them slippery.
• Replacement: pry off the old pad, clean the metal plate, then stretch the new pad over the edges so the lip locks all the way around.
• Parts choice: pick genuine Honda or a quality aftermarket pad matched to the Elysion’s pedal plate size and profile.

If the vehicle has a manual gearbox, the clutch pedal pad is serviced the same way as the brake. For high‑kilometre family movers like the Elysion, checking pedal pad condition at every service or at least every 20,000 km is a good rule of thumb. It’s a tiny job that pays off with surer footing and safer stops.

Popular questions about 2004 Honda Elysion pedal pads

Does the 2004 Honda Elysion have replaceable pedal pads?
Yes. The brake pedal uses a replaceable rubber pad, and manual versions also have a replaceable clutch pedal pad. The accelerator is typically a hard plastic face that isn’t serviced as a separate rubber pad.

How often should pedal pads be replaced?
There’s no strict kilometre interval. Replace them when the rubber is shiny, hard, cracked, or the tread is worn smooth. Many owners find they need changing somewhere between 80,000–150,000 km depending on use and climate.

Will worn pedal pads fail a WOF or RWC?
They can. If the inspector thinks the driver’s foot could slip due to wear or contamination, it may be flagged. Fresh pads with proper tread restore grip and help avoid a fail.