Skip to content Skip to navigation menu

Your Selected Vehicle

Brands

Show More Show Less

Price

Parts for your 2003 Toyota Echo|yaris-Oxygen sensor

Sort by
Fuelmiser  Oxygen Sensor  - COS720

Fuelmiser Oxygen Sensor - COS720

Confirm Vehicle
$79
Fitment Notes:
See More
Goss Oxygen Sensor - OX425

Goss Oxygen Sensor - OX425

Confirm Vehicle
$253
Fitment Notes:
See More
Goss Oxygen Sensor - OX243

Goss Oxygen Sensor - OX243

Confirm Vehicle
$184
Fitment Notes:
See More
Fuelmiser  Oxygen Sensor  - COS734

Fuelmiser Oxygen Sensor - COS734

Confirm Vehicle
$92
Fitment Notes:
See More
Fuelmiser  Oxygen Sensor  - COS929

Fuelmiser Oxygen Sensor - COS929

Confirm Vehicle
$423
Fitment Notes:
See More
Goss Oxygen Sensor - OX262

Goss Oxygen Sensor - OX262

Confirm Vehicle
$280
Fitment Notes:
See More

Explore 4WD & Adventure

Fuelmiser  Oxygen Sensor  - COS802

Fuelmiser Oxygen Sensor - COS802

Confirm Vehicle
$290
Fitment Notes:
See More
NTK Oxygen Sensor - OZA624E1
NTK

NTK Oxygen Sensor - OZA624E1

Confirm Vehicle
$156
Fitment Notes:
See More
Fuelmiser  Oxygen Sensor  - COS1311

Fuelmiser Oxygen Sensor - COS1311

Confirm Vehicle
$548
Fitment Notes:
See More
Fuelmiser Oxygen Sensor - COS723

Fuelmiser Oxygen Sensor - COS723

Confirm Vehicle
$88
Fitment Notes:
See More
Fuelmiser  Oxygen Sensor  - COS730

Fuelmiser Oxygen Sensor - COS730

Confirm Vehicle
$102
Fitment Notes:
See More
Goss Oxygen Sensor - OX480

Goss Oxygen Sensor - OX480

Confirm Vehicle
$281
Fitment Notes:
See More
NTK Oxygen Sensor - LZA07-MD14
NTK

NTK Oxygen Sensor - LZA07-MD14

Confirm Vehicle
$372
Fitment Notes:
See More
Goss Oxygen Sensor - OX632

Goss Oxygen Sensor - OX632

Confirm Vehicle
$284
Fitment Notes:
See More
Fuelmiser  Oxygen Sensor  - COS744

Fuelmiser Oxygen Sensor - COS744

Confirm Vehicle
$191
Fitment Notes:
See More
Tridon Oxygen Sensor Direct Fit - TOS113

Tridon Oxygen Sensor Direct Fit - TOS113

Confirm Vehicle
$297
Fitment Notes:
See More
Tridon Oxygen Sensor - TOS013

Tridon Oxygen Sensor - TOS013

Confirm Vehicle
$115
Fitment Notes:
See More
Fuelmiser  Oxygen Sensor  - COS1195

Fuelmiser Oxygen Sensor - COS1195

Confirm Vehicle
$213
Fitment Notes:
See More
Goss Oxygen Sensor - OX436

Goss Oxygen Sensor - OX436

Confirm Vehicle
$389
Fitment Notes:
See More
Goss Oxygen Sensor - OX735

Goss Oxygen Sensor - OX735

Confirm Vehicle
$532
Fitment Notes:
See More
Goss Oxygen Sensor - OX426

Goss Oxygen Sensor - OX426

Confirm Vehicle
$426
Fitment Notes:
See More
Fuelmiser  Oxygen Sensor  - COS1340

Fuelmiser Oxygen Sensor - COS1340

Confirm Vehicle
$299
Fitment Notes:
See More
Goss Oxygen Sensor - OX421

Goss Oxygen Sensor - OX421

Confirm Vehicle
$329
Fitment Notes:
See More
Fuelmiser  Oxygen Sensor  - COS843

Fuelmiser Oxygen Sensor - COS843

Confirm Vehicle
$331
Fitment Notes:
See More
Fuelmiser  Oxygen Sensor  - COS1194

Fuelmiser Oxygen Sensor - COS1194

Confirm Vehicle
$462
Fitment Notes:
See More
Fuelmiser  Oxygen Sensor  - COS1151

Fuelmiser Oxygen Sensor - COS1151

Confirm Vehicle
$324
Fitment Notes:
See More
Fuelmiser  Oxygen Sensor  - COS724

Fuelmiser Oxygen Sensor - COS724

Confirm Vehicle
$248
Fitment Notes:
See More
Goss Oxygen Sensor - OX492

Goss Oxygen Sensor - OX492

Confirm Vehicle
$401
Fitment Notes:
See More
Goss Oxygen Sensor - OX331

Goss Oxygen Sensor - OX331

Confirm Vehicle
$328
Fitment Notes:
See More
Goss Oxygen Sensor - OX588

Goss Oxygen Sensor - OX588

Confirm Vehicle
$337
Fitment Notes:
See More
Goss Oxygen Sensor - OX696

Goss Oxygen Sensor - OX696

Confirm Vehicle
$326
Fitment Notes:
See More
Tridon Oxygen Sensor Direct Fit - TOS109

Tridon Oxygen Sensor Direct Fit - TOS109

Confirm Vehicle
$187
Fitment Notes:
See More
Fuelmiser  Oxygen Sensor  - COS894

Fuelmiser Oxygen Sensor - COS894

Confirm Vehicle
$266
Fitment Notes:
See More
Showing 1 - 39 of 608 products

2003 Toyota Echo/Yaris oxygen sensor: purpose, tips, and when to replace

Based on Toyota’s 1NZ‑FE service literature and EPC listings for AU/NZ markets, plus Denso’s OE application guides, the 2003 Toyota Echo/Yaris is fitted with oxygen-sensing hardware: an upstream wideband Air‑Fuel Ratio (A/F) sensor (Bank 1 Sensor 1) in the exhaust manifold and a downstream heated oxygen sensor (HO2S, Bank 1 Sensor 2) after the catalytic converter. These sensors are essential for closed‑loop fuel control and emissions compliance under ADR/Euro standards, so yes—an oxygen sensor is relevant and used on this model.

On the 2003 Toyota Echo/Yaris, the oxygen sensor system constantly checks how much oxygen is left in the exhaust. The upstream A/F sensor tells the ECU whether the mix is rich or lean so it can trim fuelling on the fly. The downstream sensor largely monitors catalytic converter efficiency. Together they help the hatch run smoothly, sip fuel rather than guzzle it, and keep emissions in check—key for keeping the rego and the conscience clean.

As these sensors age (often past 160,000–200,000 km), response slows and accuracy drifts. That can show up as rough idle, a flat spot on take‑off, higher fuel use, sulphury exhaust pong, or the MIL glowing with codes like P0130–P0161 or a lean code such as P0171. A quick scan of live data can reveal lazy switching or skewed trims.

Service-wise, they’re not “set and forget”. It’s smart to inspect wiring and connectors every major service, especially the loom near the manifold heat. If the exhaust is off for other work, a visual check for contamination or damage is worthwhile. When replacement time comes, go for OE‑quality (Denso is the factory supplier). Avoid silicone sprays and sealants near the intake or exhaust—vapours can poison the sensing element.

DIYers should only remove sensors with the engine/exhaust cool to avoid thread damage. Use the proper O2 sensor socket, a dab of the correct anti‑seize if specified by the sensor maker (many sensors come pre‑coated), and tighten to the workshop manual torque. After fitting, clear codes and verify closed‑loop operation and fuel trims on a scan tool. A fresh A/F sensor can restore crisp throttle response and better kilometres per litre on the Echo/Yaris, making it a tidy value upgrade during routine servicing.

  • Common signs it’s time: worse fuel economy, MIL on, hesitant acceleration, or failed emissions test.
  • Good practice: inspect every 20,000–40,000 km, plan replacement around 160,000–200,000 km, or sooner if fault codes/logs point to a sluggish sensor.
  • Parts note: the car has one bank, positions are Bank 1 Sensor 1 (upstream A/F) and Bank 1 Sensor 2 (downstream HO2S).

Popular questions about 2003toyotaechoyaris oxygensensor

How many oxygen sensors does a 2003 Toyota Echo/Yaris have?

Most AU/NZ 2003 Echo/Yaris models with the 1NZ‑FE have two: an upstream wideband A/F sensor in the manifold and a downstream heated O2 sensor after the cat. That setup lets the ECU trim fuelling accurately and also check catalyst efficiency.

If unsure, a quick look under the bonnet and ahead of the cat will show the upstream sensor, the second sits just after the converter. A scan tool will also report Bank 1 Sensor 1 and Bank 1 Sensor 2.

What are the symptoms of a failing oxygen sensor on this model?

Expect higher fuel use, a rougher idle, lazier throttle response, or the engine light on with codes like P0130–P0161 or P0171. Live data may show slow sensor response or fuel trims pushed far positive or negative.

Left too long, a bad sensor can stress the catalytic converter, so it pays to diagnose and sort it promptly.

Can the oxygen sensor be cleaned, or should it be replaced?

Cleaning usually doesn’t restore proper function and risks damaging the sensing element. For reliable results, replacement with an OE‑quality unit is the go. After fitting, clear codes and confirm closed‑loop operation and tidy fuel trims.

Avoid contaminating new sensors with silicone or leaded additives—both will shorten their life.

{ "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "How many oxygen sensors does a 2003 Toyota Echo/Yaris have?", "acceptedAnswer": { "@type": "Answer", "text": "Most AU/NZ 2003 Echo/Yaris models with the 1NZ-FE have two: an upstream wideband A/F sensor in the manifold and a downstream heated O2 sensor after the cat. That setup lets the ECU trim fuelling accurately and also check catalyst efficiency. If unsure, a quick look under the bonnet and ahead of the cat will show the upstream sensor, the second sits just after the converter. A scan tool will also report Bank 1 Sensor 1 and Bank 1 Sensor 2." } }, { "@type": "Question", "name": "What are the symptoms of a failing oxygen sensor on this model?", "acceptedAnswer": { "@type": "Answer", "text": "Expect higher fuel use, a rougher idle, lazier throttle response, or the engine light on with codes like P0130–P0161 or P0171. Live data may show slow sensor response or fuel trims pushed far positive or negative. Left too long, a bad sensor can stress the catalytic converter, so it pays to diagnose and sort it promptly." } }, { "@type": "Question", "name": "Can the oxygen sensor be cleaned, or should it be replaced?", "acceptedAnswer": { "@type": "Answer", "text": "Cleaning usually doesn’t restore proper function and risks damaging the sensing element. For reliable results, replacement with an OE-quality unit is the go. After fitting, clear codes and confirm closed-loop operation and tidy fuel trims. Avoid contaminating new sensors with silicone or leaded additives—both will shorten their life." } } ]}