Parts for your 2002 Honda Accord-Wiper refills

2002 Honda Accord wiper refills — purpose, fitment, and easy upkeep

Per Honda’s own technical sources — the 2002 Accord Owner’s Manual, the Honda Service Manual, and the Honda Electronic Parts Catalogue — the factory windscreen wiper assemblies on this model use replaceable wiper inserts (often called wiper refills). So, wiper-refills are absolutely relevant for the 2002 Honda Accord when the original-style metal-frame blades are still fitted.

Wiper refills do a simple but vital job: the rubber insert maintains a clean, streak-free windscreen so vision stays sharp in rain and road spray. On the 2002 Accord, swapping the insert instead of the entire blade keeps things tidy, cost-effective, and true to the OEM setup.

As part of regular servicing in Australia and New Zealand, it’s smart to inspect the wiper-refills every service and plan on replacement about every 12 months or 15,000–20,000 kilometres, sooner if the car lives in coastal areas, strong UV, or heavy dust. Monthly, a quick clean of the rubber with a damp microfibre cloth and a touch of mild detergent or methylated spirits helps stop chatter and haze. Avoid running the wipers on a dry windscreen and rinse off sea spray after coastal drives — both extend refill life.

Typical sizes for many AU/NZ 2002 Accord sedans and coupes are about 600 mm (24 in) for the driver’s side and 475 mm (19 in) for the passenger’s side, but owners should confirm in the vehicle handbook or via the Honda parts catalogue against the VIN. Honda genuine insert part numbers vary by trim and side, common listings for this generation include 76622‑S84‑xxx (LH) and 76632‑S84‑xxx (RH). Note: if the original frames have been replaced with modern beam/aero blades, standard Honda refills usually won’t fit — in that case, replace the complete blade or use brand-matched inserts.

• When to replace: streaking or smearing, chattering noise, missed patches, cracked or split rubber edges, or frayed wiping lip.
• Simple replacement steps:
  1. Lift the arm, note the blade length and style.
  2. Slide the old insert out of the frame track, keeping the thin metal rails if they’re reusable.
  3. Lightly wet the track with soapy water, slide in the new insert with the rails, and lock it at the end clip.
  4. Gently lower the arm and test with washer fluid.

Kept clean and replaced on time, fresh wiper-refills help the Accord stay safe and stress-free in wet conditions.

Popular questions about 2002 Honda Accord wiper-refills

What size wiper refills does a 2002 Honda Accord take?
The front is typically around 600 mm (24 in) on the driver’s side and 475 mm (19 in) on the passenger’s side for many AU/NZ sedans and coupes. Always confirm against the owner’s manual or parts catalogue by VIN, as trim and market can vary.

How often should the wiper refills be replaced?
Plan for about every 12 months or 15,000–20,000 kilometres, earlier if exposed to strong sun, coastal salt, or dusty roads. Replace immediately if there’s streaking, chatter, splits, or missed wipe zones.

Can new Honda refills be fitted into aftermarket blades?
Usually not. Honda refills are designed for the OEM metal-frame blades. If the car has beam/aero aftermarket blades, use the complete blade replacement or the brand-specific insert that suits that blade.