Your Selected Vehicle
Parts for your 2002 Honda Accord-Headlight bulbs
Repco by Century Car Battery Superior Performance 500CCA - 55D23L MF
Repco by Century Car Battery 4x4 & SUV Ultimate Performance 760CCA - N70ZZLX MF
Repco by Century Car Battery Ultimate Performance 550CCA - 75D23L MF
Repco by Century Car Battery Ultimate Performance 710CCA - DIN65LHX MF
Explore 4WD & Adventure
Repco by Century Car Battery Superior Performance 400CCA - NS60L MF
Repco by Century Car Battery Ultimate Performance 600CCA - DIN53LHX MF
Repco by Century Car Battery Ultimate Performance 550CCA - 75D23R MF
Repco by Century 4x4 & SUV Battery Ultimate Performance 680CCA - NS70LX MF
Repco by Century Car Battery 4x4 & SUV Superior Performance 680CCA - N70ZZ MF
Repco by Century Car Battery Ultimate Performance 640CCA - DIN65LX MF
Repco by Century Car Battery Ultimate Performance 860CCA - DIN85LHX MF
Repco H11 Headlight Bulb Plus 30 Performance 12V 55W Pgj192 Bl - RH11BL-2
2002 Honda Accord headlight bulbs: what they do and how to look after them
Based on Honda’s 2002 Accord owner’s manual and Honda workshop service information for the sixth‑generation Accord, this model uses replaceable halogen headlight bulbs (capsules), not sealed beams or fixed LED units. That makes “headlight bulbs” absolutely relevant for the 2002 Honda Accord, with common fitments being HB4 (9006) for low beam and HB3 (9005) for high beam in many trims, while some market variants use H1/H4. Always confirm the exact type on the lamp cap or in the owner’s manual.
On this Accord, the headlight bulbs do the heavy lifting for safe night driving and poor‑weather visibility, keeping the car compliant with ADR/ECE lighting requirements. Halogen bulbs naturally dim over time, so swapping in fresh bulbs can noticeably sharpen the beam and help the driver see and be seen.
For servicing, it’s smart to treat headlight bulbs like other wear items. They’re inexpensive, easy to replace, and make a big safety difference. Under the bonnet, access is straightforward on most trims. Avoid touching the glass—skin oils create hot spots and shorten bulb life. If it’s a tight spot, a clean rag or gloves help. After fitting, check beam aim against a wall or use a flat surface to ensure the pattern sits correctly and doesn’t dazzle other road users.
- Replace in pairs so brightness and colour match left to right.
- If driving lots at night, consider fresh bulbs every 3–4 years or ~60–80,000 km.
- Look for signs it’s time: dim output, yellowing colour, or occasional flicker.
- Inspect connectors and earth points for corrosion, clean and refit snugly.
- Check the headlamp lenses for haze or moisture, polish or reseal as needed.
Bulb choice matters. A standard long‑life halogen keeps maintenance simple and cost‑effective. “Plus” performance halogens can add brightness but may have a shorter lifespan. LED retrofit bulbs are a different story: many jurisdictions in Australia and New Zealand restrict their use in halogen reflector housings unless specifically approved. If considering LEDs, choose ADR/ECE‑approved options and confirm local legality before fitting.
With the right bulbs installed and aligned, the 2002 Accord feels fresher at night, keeps the driver confident on unlit roads, and stays on the right side of the law—all for not much more than a couple of coffees and a quick arvo in the driveway.
Popular questions about 2002 Honda Accord headlight bulbs
What bulb types fit a 2002 Honda Accord?
Most 2002 Accord variants use halogen capsules—commonly HB4 (9006) for low beam and HB3 (9005) for high beam—though some markets/trims use H1 or H4. The definitive guide is the owner’s manual or the stamping on the back of the headlamp cap.
Why replace headlight bulbs in pairs?
Halogens dim gradually, so a single new bulb beside an old one gives mismatched brightness and colour. Replacing both ensures a balanced beam pattern, better visibility, and a tidy look from the front of the car.
Can LEDs be used instead of halogen in a 2002 Accord?
Possibly, but check local rules. Many AU/NZ jurisdictions restrict LED retrofits in halogen reflector housings unless the kit is specifically approved to ADR/ECE standards. Even then, aim and beam control are critical to avoid glare—choose approved gear and fit carefully.