Skip to content Skip to navigation menu

Your Selected Vehicle

Brands

Show More Show Less

Price

Parts for your 2001 Toyota Hilux-Struts

Sort by
Repco 56in Workstation Hutch - RWSH-56IN-GY

Repco 56in Workstation Hutch - RWSH-56IN-GY

$989
Fitment Notes:
See More
Repco 50in Workstation Top Locker - RWSL-50IN-GY

Repco 50in Workstation Top Locker - RWSL-50IN-GY

$572
Fitment Notes:
See More
Repco Strut - Gas Spring Support

Repco Strut - Gas Spring Support

Confirm Vehicle
$58
Fitment Notes:
See More
Repco Gas Strut - RGS15404

Repco Gas Strut - RGS15404

Confirm Vehicle
$77
Fitment Notes:
See More

Explore 4WD & Adventure

CODE9 Strut - 922015L

CODE9 Strut - 922015L

Confirm Vehicle
$344
Fitment Notes:
See More
Repco Gas Strut - RGS14687
Clearance

Repco Gas Strut - RGS14687

Confirm Vehicle
$28
Fitment Notes:
See More
CODE9 Strut - 9250686

CODE9 Strut - 9250686

Confirm Vehicle
$217
Fitment Notes:
See More
Repco Strut - Gas Spring Support

Repco Strut - Gas Spring Support

Confirm Vehicle
$72
Fitment Notes:
See More
Repco Strut - Gas Spring Support

Repco Strut - Gas Spring Support

Confirm Vehicle
$58
Fitment Notes:
See More
Repco Strut - Gas Spring Support

Repco Strut - Gas Spring Support

Confirm Vehicle
$57
Fitment Notes:
See More
Repco Gas Strut - RGS14697
Clearance

Repco Gas Strut - RGS14697

Confirm Vehicle
$30
Fitment Notes:
See More
CODE9 Strut - 926401L

CODE9 Strut - 926401L

Confirm Vehicle
$286
Fitment Notes:
See More
Repco Gas Strut - RGS14378
Clearance

Repco Gas Strut - RGS14378

Confirm Vehicle
$16
Fitment Notes:
See More
CODE9 Strut - 9260531

CODE9 Strut - 9260531

Confirm Vehicle
$275
Fitment Notes:
See More
Repco Strut - Gas Spring Support

Repco Strut - Gas Spring Support

Confirm Vehicle
$72
Fitment Notes:
See More
Repco Gas Strut - RGS14684

Repco Gas Strut - RGS14684

Confirm Vehicle
$102
Fitment Notes:
See More
Repco Strut - Gas Spring Support

Repco Strut - Gas Spring Support

Confirm Vehicle
$57
Fitment Notes:
See More
Repco Strut - Gas Spring Support

Repco Strut - Gas Spring Support

Confirm Vehicle
$52
Fitment Notes:
See More
Repco Gas Strut - RGS14696

Repco Gas Strut - RGS14696

Confirm Vehicle
$102
Fitment Notes:
See More
Repco Gas Strut - RGS14698
Clearance

Repco Gas Strut - RGS14698

Confirm Vehicle
$31
Fitment Notes:
See More
Repco Strut - Gas Spring Support

Repco Strut - Gas Spring Support

Confirm Vehicle
$55
Fitment Notes:
See More
CODE9 Strut - 926406L

CODE9 Strut - 926406L

Confirm Vehicle
$340
Fitment Notes:
See More
CODE9 Strut - 926406R

CODE9 Strut - 926406R

Confirm Vehicle
$340
Fitment Notes:
See More
Showing 1 - 39 of 4154 products

2001 Toyota HiLux and Struts: What’s Actually Fitted

For the 2001 Toyota HiLux, struts aren’t part of the suspension design. This model sits on a ladder-frame chassis and runs separate shock absorbers rather than MacPherson struts. Up front it uses a double wishbone layout: 4x4 variants typically pair torsion bars with separate shocks, while many 2WD models use coil springs with separate shocks. Down the back it’s classic leaf springs with shock absorbers. In other words, there’s no structural strut tower or integrated spring/strut unit to service on this ute.

Technical sources that back this up include Toyota’s Hilux Repair Manual for this generation (suspension section detailing double wishbone with torsion bars or coils, and rear leaf spring design), the Toyota Electronic Parts Catalogue for 2001 (which lists “Shock Absorber Assy” rather than “Strut”), and major aftermarket catalogues from KYB and Monroe (which specify shock absorbers for both front and rear of this model, not struts).

Why no struts? MacPherson struts are common in monocoque passenger cars, where the strut doubles as a structural member and saves space and weight. The 2001 HiLux is a body-on-frame workhorse built for load-carrying and rough terrain. The separate shock absorber with torsion bar or coil on a double wishbone front end provides strong control arm geometry, robust travel, and easy serviceability. At the rear, leaf packs handle payload with a separate shock doing the damping. It’s a tough, modular setup that suits Aussie and Kiwi roads and worksites brilliantly.

If the HiLux feels floaty, bangs through corrugations, or noses down under brakes, think shocks, bushes, and ball joints rather than struts. Owners should keep an eye out for oil misting on the shock body, uneven tyre wear, excessive bounce after speed humps, and clunks over bumps.

  • Front: replace worn shock absorbers, check upper and lower ball joints, control arm bushes, and ride height (torsion bar sag on 4x4s).
  • Rear: inspect shock absorbers, leaf spring bushes, shackles, and U-bolts, verify ride height under load.
  • Steering and alignment: check tie-rod ends and idler/pitman components, then book a proper wheel alignment to keep tyres happy.

Service intervals depend on use, but a good rule is to inspect every 20,000–40,000 km and expect shocks to last anywhere from 80,000–120,000 km in mixed driving. Heavy loads, towing, gravel roads, and corrugations typical in regional Australia and New Zealand can shorten that. Quality replacement shocks (OE-equivalent or heavy-duty) will sharpen control, reduce brake dive, and keep tyres wearing evenly—delivering the secure, planted feel drivers want from a HiLux.

  • Does my 2001 Toyota HiLux have struts?

    No. The 2001 HiLux uses separate shock absorbers with a double wishbone front end (torsion bar or coil, depending on variant) and leaf springs with shocks at the rear. There are no MacPherson struts on this model.

    This is confirmed by Toyota’s service literature and major parts catalogues, which list shock absorbers rather than strut assemblies for all corners.

  • What should I replace instead of struts if my HiLux feels bouncy?

    Start with the shock absorbers—front and rear. Also check front upper/lower ball joints, control arm bushes, tie-rod ends, idler/pitman components, and rear leaf spring bushes and shackles.

    After replacing worn components, get a wheel alignment and balance the tyres. This restores proper geometry, improves braking stability, and reduces uneven tyre wear.

  • Can I convert a 2001 HiLux to use struts?

    Retrofitting true MacPherson struts isn’t practical on a ladder-frame HiLux without major structural redesign. Some owners fit coilover-style shocks within the original double wishbone arrangement, but that’s still not a MacPherson strut.

    If considering coilovers or lift kits, choose engineered components, ensure certification where required, and verify alignment and CV angles. For most owners, quality shocks, fresh bushes, and correct ride height deliver the best result.