Parts for your 2000 Toyota Altezza-Pedal pads

2000 Toyota Altezza pedal pads

Pedal pads are relevant and fitted to the 2000 Toyota Altezza. Technical sources that confirm this include the Toyota Electronic Parts Catalogue (EPC) for SXE10/GXE10 Altezza, which lists a “Pad, Pedal (Brake)” and, on manual-transmission models, a “Pad, Pedal (Clutch).” Toyota’s chassis/brake service literature for the Altezza/IS200 platform also specifies inspection and replacement of the brake (and clutch, where fitted) pedal rubber pads during servicing. Regulatory guidance used for WOF/roadworthy inspections in NZ and Australia additionally expects an anti-slip surface on service brake pedals, reinforcing their presence and maintenance requirement on this model.

On the 2000 Altezza, the brake and clutch pedal heads wear slip-on rubber pads, the accelerator is typically a moulded assembly without a separate rubber cover. The pads provide grip in wet boots, reduce vibration, and help the car meet safety and inspection standards. When they harden, crack, or turn shiny-smooth, grip drops off and it’s time to replace them.

Servicing tips for owners and workshops:

• Inspection: Check the pad face for glazing, deep cracks, missing chunks, or edges curling away from the metal pedal. If the pedal feels slippery in damp weather, assume it’s due.
• Replacement: It’s a quick driveway job. Peel the old pad off, clean the pedal plate with a mild degreaser, then warm the new pad slightly (sunlight or warm water) and roll it on from the bottom lip. Make sure the pad’s lip is fully seated all the way around.
• Parts choice: Stick with genuine or quality aftermarket pads that match the Altezza’s pedal shape. Cheap, overly hard rubbers don’t grip well and can fail WOF/roadworthy checks.
• Care: Keep silicone dressings and petroleum products off the pads—they make them slick and can degrade the rubber. A quick wash with mild soap and water during routine interior cleans is plenty.
• When to replace: There’s no set interval—go by condition. Daily driving, wet climates, or track days can accelerate wear. If the car is manual, expect the clutch pad to wear similarly to the brake pad.

After fitting, press the pedals firmly to confirm the pad doesn’t shift, and check pedal free play/height per the service manual if you’ve adjusted anything else. Good pedal grip is a small upgrade that pays off every time it rains.

Popular questions

Does the 2000 Toyota Altezza have replaceable pedal pads?
Yes. The brake pedal has a replaceable rubber pad, and manual-trans models also have a clutch pedal pad. The accelerator is usually an integrated pedal without a separate rubber cover.

How often should pedal pads be replaced on an Altezza?
There’s no fixed kilometre schedule—replace when the rubber is shiny, cracked, hard, or the edges lift. Many cars need them every few years, sooner if driven in wet conditions or used for spirited/track driving.

Are Altezza pedal pads the same as Lexus IS200 ones?
Generally yes, as the Altezza (SXE10/GXE10) shares its pedal hardware with the IS200 platform. Always match by model code and transmission type in a parts catalogue to be sure.