Your Selected Vehicle
Parts for your 2000 Honda Accord-Pedal pads
Explore 4WD & Adventure
2000 Honda Accord Pedal Pads: Purpose, Care, and When to Replace
Pedal pads are absolutely relevant on the 2000 Honda Accord. Honda’s factory service manual for the 1998–2002 Accord series includes inspection and replacement of the brake (and clutch, on manual models) pedal pads, and Honda’s genuine parts catalogue lists dedicated “Pad, Pedal” components for this generation. Automatic models have a brake pedal pad, manual models have both brake and clutch pedal pads. The accelerator typically uses a fixed treaded surface rather than a removable pad.
On a 2000 Accord, pedal pads are simple but important: they’re the grippy rubber covers on the metal pedal arms that stop a foot from slipping, especially in the wet. Over time they harden, glaze, crack, or wear smooth. That’s not just annoying—it can be unsafe. Roadworthy and WoF checks across Australia and New Zealand commonly look for secure, non-slip pedal surfaces, so a worn pad can earn a fail.
During regular servicing, a quick glance and squeeze test goes a long way. If the rubber is shiny, cracked, or the tread is low, it’s time. Replacement is straightforward and inexpensive, and it restores the proper feel underfoot.
- What’s fitted: Brake pedal pad (auto and manual), clutch pedal pad (manual only). Accelerator: fixed surface, not a separate pad.
- What it does: Provides grip, dampens vibration, and sets the correct pedal feel and height.
- When to replace: When smooth, hard, cracked, loose, or if boots slip—often anywhere from 5–10 years depending on use.
DIY replacement is simple:
- Park safely, ignition off. Clean the metal pedal face.
- Warm the new pad slightly (sunlight or warm water) so it’s pliable.
- Hook the lower lip first, then roll the pad over the pedal until the upper lip snaps on. Check all edges are fully seated.
Tech tips they’ll appreciate: avoid silicone dressings or harsh solvents on pads—they can make them slippery or brittle. If the original pad is missing, confirm the bare metal isn’t bent and that the correct OEM-style pad is used to maintain pedal height and feel. On manuals, replace brake and clutch pads as a pair for consistent grip. A quick check every service or 10,000 km is smart, especially if the car sees wet weather or muddy worksites.
Popular questions about 2000 Honda Accord pedal pads
Which pedals on a 2000 Accord have replaceable pads?
The brake pedal always has a replaceable rubber pad. Manual-transmission Accords also have a clutch pedal pad. The accelerator uses a fixed tread surface and isn’t designed to take a removable pad or cover.
How often should pedal pads be replaced?
There’s no set interval—replace when worn, cracked, shiny, or slippery. Many owners find they last years, but heavy city driving, wet boots, and heat can age them faster. If a WoF or roadworthy inspector notes low grip, swap them straight away.
Are aftermarket pedal covers legal in Australia and New Zealand?
They can be, provided they’re secure, non-slip, and don’t alter safe pedal operation. Universal metal clip-on covers that loosen or reduce grip can draw attention at inspection time. OEM-style rubber pads are the safe, compliant choice.
