Parts for your 2000 Ford Falcon-Clutch kit

2000 Ford Falcon clutch kit: relevance, purpose and servicing advice

Based on the Ford AU Series II Falcon Workshop Manual (Powertrain—Clutch), plus Australian clutch catalogues from Exedy and ClutchPro that list kits for AU Falcon 1998–2002 with the T5 5‑speed manual, a clutch kit is absolutely relevant to manual‑transmission 2000 Ford Falcon models. Those same sources also note that automatic Falcons of the year don’t use a clutch kit, as they rely on a torque converter instead of a friction clutch. Tremec documentation for the T5 gearbox further confirms a conventional single‑plate clutch arrangement on manual Falcons of this era.

For anyone running a manual 2000 Falcon, the clutch kit is the heart of getting power to the road smoothly. A typical kit includes the clutch disc, pressure plate and release bearing, and often a spigot/pilot bearing and alignment tool. Together, they let the driver engage and disengage the engine from the gearbox predictably, whether it’s an everyday commute or a spirited country run.

As part of regular servicing, it pays to keep an ear and feel out for the tell‑tales: slipping under load, a high engagement point, shudder off the line, notchy gear changes or chirping/rumbling when the pedal’s pressed. If any of that crops up, it’s time to plan a clutch inspection. When replacement’s due, doing the lot as a kit avoids mismatched wear and saves rework. The flywheel should be resurfaced or replaced to give the new friction disc a fresh, flat mating face. It’s also smart to check the rear main seal and gearbox input shaft seal while the box is out—cheap insurance against future leaks.

Actuation is worth a look, too. Many AU Falcons use a cable setup, while some variants differ—so check whether yours is cable or hydraulic. For cables, inspect for fraying, binding and correct adjustment