Your Selected Vehicle
Parts for your 1999 Toyota Crown-Headlight bulbs
Explore 4WD & Adventure
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
LED Autolamps 12/24V 280 Mini Jumbo Stop/Tail/Indicator/Reverse LED Light Blister Pack - 280ARWM
Fitment Notes:
LED Autolamps 12/24V Cat6 Side Direction Indicator Clear Lens Blister Pack - 77ACM
Fitment Notes:
LED Autolamps 12/24V White Emergency Lamp Flash Patterns With Sync Wire - 120033WM
Fitment Notes:
OEX 00 B&S Battery Lead, Post to Stud, Length - 460mm, Stud Hole - 12mm - ACX1036
Fitment Notes:
Narva Heavy Duty Toggle Switch On/Off/On SPDT (Contacts Rated 50A @ 12V) - 60080BL
Fitment Notes:
OEX 2 B&S Battery Lead, Post to Stud, Length - 1,220mm, Stud Hole - 10mm - ACX1015
Fitment Notes:
Narva Cigarette Lighter Plug with Off/On Rocker Switch and L.E.D Indicator and Spiral Lead - 81012BL
Fitment Notes:
OEX Panel Mount Fuse Holder Mega 1 Way 500A 1 Pce - End Connection Entry - ACX6530
Fitment Notes:
Headlight Bulbs Replacement and Maintenance for Your 1999 Toyota Crown
The headlight bulbs of your 1999 Toyota Crown are essential not only for safe night-time driving but also for maintaining good visibility during poor weather conditions. Regular maintenance or replacement is key to ensuring your headlights are in top working order.
When considering headlight bulb replacement, you first need to identify the type of bulbs your Toyota Crown requires. Typically, it might use halogen or HID (high-intensity discharge) bulbs, each with its distinct characteristics. Halogen bulbs are common for their affordability and ease of availability, but they may have a shorter lifespan than HID bulbs, which can emit brighter, whiter light.
- Begin by ensuring your vehicle is turned off, with the keys removed from the ignition for safety. Pop open the bonnet and locate the headlight assembly at the front of your car.
- Remove the connector from the back of the bulb. This may require some wiggling, but it should come off easily. If there's a dust cover, twist it off to access the bulb.
- The headlight bulb is often held in place by a clip or a spring. Unclip or unfasten the bulb carefully and remove it from the headlight assembly.
Please avoid touching the new bulb with your bare hands. Oils from your skin can reduce the lifespan of the bulb. If you accidentally touch it, clean it with a bit of rubbing alcohol and a lint-free cloth.
- Insert the new bulb into the assembly, ensuring it is secured by the clips or springs.
- Reattach the dust cover if there was one, and plug the connector back into the bulb.
- Once everything is secured, test the headlight by turning on your car's electrical system to ensure it functions properly.
Beyond bulb replacement, general maintenance is recommended to keep your headlights at their best. Regularly cleanse the headlight covers to avoid the haze that can form over time from exposure to the elements. This keeps beam strength optimum and ensures safety standards are met.
If you're unsure or uncomfortable with replacing the bulbs yourself, visiting a professional mechanic can offer peace of mind and ensure the job is done correctly. Proper headlight function is critical for road safety, so regular checks and timely replacements are worthwhile investments for your vehicle's maintenance routine.