Your Selected Vehicle
Parts for your 1999 Toyota Avensis-Headlight bulbs
LED Autolamps 12V Round Stop/Tail Lamp With Red Lens Recessed Mount - 102R
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIMB
LED Autolamps Twin Function Stalk Side Indicator With Red/Amber Side Marker LHS Multivolt - 805ARIML
Explore 4WD & Adventure
LED Autolamps Twin function rear position with supplementary rear indicator - 97RIMB
LED Autolamps Twin function side indicator with amber/red side marker - 97ARIM
LED Autolamps 12V Round Indicator Lamp With Amber Lens Recessed Mount 130mm Diameter - 102A
LED Autolamps Twin function front position with supplementary front indicator - 97CWIM
LED Autolamps Rear End Outline LED Marker Red 12/24v Red Lens 16cm Cable Blister Pack - 42RM
LED Autolamps Twin function front position with supplementary front indicator - 97WIMB
LED Autolamps 12/24V Reverse Light 200x50mm With 25 LEDs Black Bracket - 200BWM
LED Autolamps Twin function front position with supplementary front indicator - 97CWIMCSB
LED Autolamps Multi Volt Indicator Lamp With Clear Lens And Chrome Reflector Blister Pack - 131CAM
LED Autolamps Multi Volt Rear Combination LED Lamp With Grey Housing And Base - 275GARWMB
LED Autolamps 12/2V Maxilamp LED Stop/Tail/Indicator/Reflector Black Chrome Bolt Mount - MAXILAMPC1XCE
LED Autolamps 12V Stop/Tail/Indicator Lamp With Reflex Reflector 100x100x25mm - 100BAR
LED Autolamps 10/30V Chrome Series LED Red Amber Side Marker With 40cm Wire - 35CCARM
LED Autolamps Amber LED Indicator Lamp Insert For J3 Series Blister Pack - J3AM
LED Autolamps Twin function side indicator with amber/red side marker - 97CARIM
1999 Toyota Avensis headlight-bulbs
Headlight-bulbs are absolutely relevant and used on the 1999 Toyota Avensis (T22 series). Technical references such as the Toyota Avensis Owner’s Manual (1997–2003 lighting section), Toyota service literature, and global bulb catalogues from OSRAM and Philips specify halogen headlight bulbs for this model. Most 1999 Avensis variants run H7 low beam with H1 high beam, while some trims use a dual‑filament H4 unit. Always confirm against the vehicle handbook or a reputable bulb catalogue for the exact fitment.
On a 1999 Avensis, the headlight-bulbs do the heavy lifting for safe night driving and poor weather visibility. They project a controlled beam to help the driver see ahead and to make the car visible to others, meeting local road rules and Warrant/Registration standards across Australia and New Zealand. Halogen bulbs are the original equipment choice here, balancing brightness, beam focus and compatibility with the reflector housings.
As part of servicing of your 1999-toyota-avensis headlight-bulbs, it’s smart to replace them in pairs, especially the low beams, so the colour and brightness match. If the light looks yellowed, the beam pattern seems patchy, or there’s frequent high‑beam flashing from oncoming traffic, it’s time to check the bulbs and headlamp aim. Upgrading to premium halogen (+130% style) can lift output while staying ADR/WoF friendly, but avoid higher‑wattage rally bulbs that can overheat wiring and lenses.
- Switch ignition off and let the bulbs cool. Open the bonnet and remove the rear headlamp cover.
- Unplug the connector, release the spring clip or bayonet, and withdraw the bulb. Don’t touch the glass, oils shorten bulb life.
- Match the base (H7/H1/H4 as applicable), seat the new bulb correctly, refit the clip, reconnect, and test both beams.
Handy tips: wear clean gloves, if the glass is touched, wipe with isopropyl alcohol. Inspect the lens for haze and the housing for moisture—both cut light output. Check battery/alternator voltage (over‑voltage cooks filaments) and confirm headlight aim after any front‑end work. Keeping a spare pair in the glovebox can save a late‑night headache.
FAQs
What headlight-bulbs fit a 1999 Toyota Avensis?
Most T22 Avensis models use H7 for dipped/low beam and H1 for main/high beam. Some trims have a combined H4 dual‑filament bulb. The definitive call is in the vehicle’s lighting section of the Toyota Owner’s Manual, or a trusted bulb catalogue for the exact market and trim.
Can LED replacements be used legally?
LED retrofits in halogen reflector housings are often not road‑legal in many Australian states and in New Zealand unless specifically approved and compliant. They may also scatter light poorly in the original reflector. For road use, stick with quality halogen upgrades that meet ADR/NZTA standards, and reserve non‑approved LEDs for off‑road use only.
Why do new bulbs fail early?
Common causes include touching the glass during install, vibration from loose mounts, moisture in the housing, cheap low‑quality filaments, or over‑voltage from charging issues. Fit carefully without touching the glass, ensure the rear cover seals properly, and check charging voltage to extend bulb life.