Your Selected Vehicle
Parts for your 1999 Toyota Altezza-Headlight bulbs
Narva Sealed Rocker Switch On/On DPDT 12/24V Red LED (Contacts Rated 20A @ 12V) - 63166BL
Fitment Notes:
Explore 4WD & Adventure
Cole Hersee Toggle Switch Mom On - Off - Mom On - SPDT (Contacts Rated 25A @ 12V) - 55021BL
Fitment Notes:
Narva Heavy Duty Rocker Switch Off/Momentary On SPST (Contacts Rated 20A @ 12V) - 63050BL
Fitment Notes:
Cole Hersee Rocker Switch On/Off SPST 12V Green Illuminated (Contacts Rated 25A @ 12V) - 58328-11BL
Fitment Notes:
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIMCSB
Fitment Notes:
LED Autolamps Twin function front position with supplementary front indicator - 97CWIMCSB
Fitment Notes:
Narva Crimp Terminal Ring Brass Terminal Entry 8.4mm Non Insulated 100 Pce - 56240
Fitment Notes:
OEX 39mm Dual Wall Heat Shrink Polyolefin with Adhesive Tubing Black 1.2M - ACX1297L
Fitment Notes:
OEX 2 B&S Battery Lead, Post to Stud, Length - 1,370mm, Stud Hole - 10mm - ACX1016
Fitment Notes:
Narva 9–33 Volt LED Light Guide Side Marker Lamp (Amber) With Chrome Cover - 92406
Fitment Notes:
Maintaining and Replacing Headlight Bulbs on Your 1999 Toyota Altezza
When it comes to the upkeep of your 1999 Toyota Altezza, the headlight bulbs play a critical role not just in visibility but also in the overall safety of your driving experience. Regular maintenance and timely replacement of these bulbs ensure that you can clearly see the road ahead, while also making sure other drivers can see you. If it's time to replace your headlight bulbs, or if you're simply performing routine checks, here are some helpful tips and advice to aid you through the process.
- Understanding the Bulbs:
- The 1999 Toyota Altezza typically uses halogen bulbs. These bulbs are known for their brightness and relatively longer lifespan, making them a popular choice among drivers.
- Signs That it's Time for a Replacement:
- A dimmer light than usual, flickering, or a complete burnout are clear indicators that your headlight bulbs need replacing. It's crucial to act on these signs promptly to maintain effective visibility on the road.
- Steps to Replace Headlight Bulbs:
- First, ensure the car is off and the headlights are cool to touch. Pop open the bonnet and locate the rear of the headlight assembly. Most often, the bulb will be secured with a clip, press down and gently push back on either side to release it.
- Carefully remove the old bulb and disconnect it from the power socket. Take your new bulb, ensuring you don't touch the glass part with your fingers, as oils from your skin can cause it to burn out prematurely. Secure the new bulb into the power socket and clip it back into place.
- Testing and Adjustments:
- Once replaced, test the headlights to ensure they function correctly. Stand in front of the car and confirm that the light pattern on a wall or the level ground is consistent and properly aligned.
- Regular Maintenance Tips:
- Incorporating headlight checks into your regular vehicle maintenance routine can help prolong the life of your bulbs. Clean the headlight covers as dull, foggy lenses can also reduce the effectiveness of the lights.
- If you often drive in harsh weather conditions, it might be useful to carry a spare set of bulbs in your vehicle.
By keeping your headlight bulbs in good condition, you're not only enhancing your driving experience but also contributing to safer roads. Be it replacement or routine maintenance, taking the time to check your headlights can make a world of difference. So go ahead, pop the bonnet, and give your headlights the care they deserve.