Skip to content Skip to navigation menu

Your Selected Vehicle

Brands

Price

Parts for your 1999 Nissan Primera-Wiper blades

Sort by
Bar's Bugs Windscreen Cleaner 600ml - BB600
MULTI BUY

Bar's Bugs Windscreen Cleaner 600ml - BB600

$8
Fitment Notes:
See More
Trico Wiper Blades Refill 6mmx610mm Plastic - TRN61020

Trico Wiper Blades Refill 6mmx610mm Plastic - TRN61020

$21
Fitment Notes:
See More

Explore 4WD & Adventure

Bar's Bugs Windscreen Cleaner Super Concentrate 5L

Bar's Bugs Windscreen Cleaner Super Concentrate 5L

$45
Fitment Notes:
See More
Trico Vision Washer Additive 500ml - A90020

Trico Vision Washer Additive 500ml - A90020

$14
Fitment Notes:
See More
Bar's Bugs Windscreen Cleaner 375ml - BB375

Bar's Bugs Windscreen Cleaner 375ml - BB375

$8
Fitment Notes:
See More
Bar's Bugs Windscreen Cleaner Pre-Mix 3l - BBPM3

Bar's Bugs Windscreen Cleaner Pre-Mix 3l - BBPM3

$17
Fitment Notes:
See More
Reflector Triangle Red 440mm - 3 Pc - 84200

Reflector Triangle Red 440mm - 3 Pc - 84200

$140
Fitment Notes:
See More
Showing 1 - 15 of 15 products

Wiper Blade Maintenance and Replacement for Your 1999 Nissan Primera

Wiper blades play a crucial role in ensuring clear visibility during harsh weather conditions. For the 1999 Nissan Primera, it's essential to maintain your wiper blades due to New Zealand's varied climate, which can cause wear and tear over time. Proper maintenance is a staple part of routine vehicle servicing, ensuring safe driving conditions by keeping your windshield clear of rain, snow, and debris.

It's recommended that wiper blades be inspected regularly, ideally whenever you conduct maintenance checks or top up your windscreen wiper fluid. Look for signs of wear such as streaking, chattering, skipping, or splitting in the rubber. These are indicators that it's time for a replacement.

When replacing the wiper blades on your Nissan Primera, note the correct sizes needed. Typically, vehicles like the Nissan Primera may use different lengths for the driver's side, passenger side, and rear window. Ensuring you have the right size prevents improper fitment that can lead to poor performance.

  1. Purchase quality replacement blades that are specifically suited for your vehicle's make and model. These might be more expensive than generic options but often last longer and perform better.
  2. Begin by lifting the wiper arms away from the windshield. Most vehicles have a small tab on the underside of the wiper arm, press this to release the old blade.
  3. Match the new blade size with the old one before installation to ensure a perfect fit.
  4. Slide the new blade into place following the manufacturer's instructions. You should hear a click or feel it securely latch into place.
  5. Lower the wiper arm gently back onto the windshield. Avoid letting it snap back as this could damage the glass.

Once installed, test the wiper blades to ensure they are operating smoothly. Listen for any unusual sounds and check that they are clearing the windshield without leaving streaks. This simple replacement task can greatly improve your driving safety in wet conditions.

To prolong the lifespan of your wiper blades, consider the following maintenance tips:

  • Regularly clean your blades with a non-abrasive cleaner. This removes any dirt or grime that might cause friction.
  • During snowy weather, use a brush or ice scraper on your windshield instead of the wipers to remove snow or ice.
  • Keep the windshield washer fluid topped up to help the blades glide smoothly.
  • Occasionally lift the wipers away from the windshield during extreme heat to prevent the rubber from sticking.

Maintaining your wiper blades might seem like a minor aspect of vehicle care, yet it's vital for optimal visibility and driving safety. Ensuring they are in good condition enhances your driving experience, providing peace of mind on the road.