Your Selected Vehicle
Parts for your 1998 Suzuki Swift-Headlight bulbs
LED Autolamps 12V/24V Round LED Stop/Tail Lamp With Grommet and Plug - 110RMG
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
LED Autolamps 12V 82 Series Stop/Tail/Indicator/Reverse Lamp Black Bracket - 82BARW
LED Autolamps 12/24V LED Reverse Lamp Screw Surface Mount Blister Pack - 12WM-2
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Explore 4WD & Adventure
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly With 123 LEDs - 100BARWM
LED Autolamps Multi Volt LED Licence Plate Lamp With Chrome Base Twin Blister - 30CLM
LED Autolamps 12/24V Round Indicator Lamp With Clear Lens 130mm Diameter Recessed Mount - 102ACM
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIM
LED Autolamps 10/30V Front Outline Position Marker 4 White LEDs With 40cm Wire - 35WM
LED Autolamps RHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284RHS
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Chrome Bracket Blister Pack - 82CARRW
LED Autolamps Front End Outline Marker White 12/24Vwith 2P plugs 10cm cable - 58WMB2P
LED Autolamps Twin function rear position with supplementary rear indicator - 97RIMB
LED Autolamps 12/24V LED Stop/Tail/Indicator Light 284x100x27mm Blister Pack - 282ARRM
LED Autolamps MultiVolt R.H.S Stop/Tail/Indicator Assembly 128 Round LEDs - 125BARMR
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
LED Autolamps Twin function front position with supplementary front indicator - 97WIM
1998 Suzuki Swift headlight-bulbs — what they do and how to look after them
Headlight-bulbs are absolutely relevant to the 1998 Suzuki Swift. Technical references including the 1998 Suzuki Swift (SF series) owner’s manual and the Suzuki Genuine Parts catalogue specify a replaceable H4 12V 60/55W halogen bulb for the headlamps. Industry bulb guides from major lighting manufacturers also list H4 for this model across AU/NZ variants, confirming it’s a standard halogen reflector setup rather than a sealed-beam or HID unit.
On a ’98 Swift, the headlight-bulbs provide both low and high beam via a dual‑filament H4, giving clear forward vision at night and helping oncoming traffic see the car. Because halogen output fades with age, even before a filament blows, keeping bulbs fresh is a simple way to boost safety and stay compliant with local roadworthy/WOF checks.
For servicing, it’s smart to replace headlight-bulbs in pairs so beam colour and brightness match. Stick with 12V 60/55W H4 to avoid cooking wiring or reflectors, higher‑wattage bulbs can overheat and may not be legal without upgraded looms and relays. If extra punch is needed, choose ADR/ECE‑approved “plus” performance H4s rather than upping wattage.
Typical replacement steps are straightforward: unplug the three‑pin connector at the rear of the lamp, peel back the rubber boot, release the spring clip, remove the old H4, and seat the new bulb with the locating tab correctly oriented. Avoid touching the glass, fingerprints can create hot spots and shorten life. Reseat the clip, refit the boot, and reconnect the plug, then test both beams.
During a service, it’s worth checking aim and lens condition. Cloudy lenses or moisture inside the housing will dull output, polish the lens if it’s hazed and sort any seal leaks. If a new bulb doesn’t light, check the fuse, relay, and earth connections at the headlamp. Many owners do a quick headlight check every few months or before long night drives.
- Bulb spec: H4 (HB2/9003 equivalent), 12V 60/55W halogen
- Replace in pairs for even light and colour
- Don’t touch the glass, use gloves or a clean tissue
- Verify beam aim after any bulb change
FAQs
What bulb type fits a 1998 Suzuki Swift?
Most AU/NZ 1998 Swifts take an H4 12V 60/55W halogen bulb for both low and high beam. Trim levels and aftermarket headlamp assemblies can vary, so it’s wise to check the stamping on the headlamp or the owner’s manual before buying. Avoid higher‑wattage bulbs unless the wiring has been upgraded and the setup remains road‑legal.
How do you change the headlight-bulb on a ’98 Swift?
Open the bonnet, unplug the 3‑pin connector from the back of the headlamp, peel off the rubber dust boot, then unclip the spring retainer. Swap in the new H4 (don’t touch the glass), refit the clip and boot, reconnect the plug, and test low/high beam. If the beam pattern looks off, adjust the aim using the headlamp adjusters.
Should headlight-bulbs be replaced in pairs?
Yes, it’s recommended. Halogen bulbs dim over time, so a single fresh bulb can look brighter and a different colour to the older side. Replacing both keeps light output even and avoids one side failing soon after the other.