Parts for your 1998 Mitsubishi Pajero-Wiper refills

1998 Mitsubishi Pajero wiper refills — fitment, purpose and care

Technical fitment verdict: Wiper refills are relevant and used on the 1998 Mitsubishi Pajero. Factory documentation for the second‑generation Pajero (1991–1999 models) describes replacing the blade rubber separately from the metal wiper frame, and Mitsubishi’s genuine parts catalogues list the “blade rubber” as an individual service item. Major AU/NZ aftermarket catalogues (including Tridon, Bosch and Repco) also list insert‑style refills for this model’s front and rear wipers. That combination of workshop guidance and parts listings confirms the Pajero accepts refill inserts rather than requiring a complete blade every time.

On this tough old Pajero, wiper refills do the quiet, crucial job of keeping the windscreen clear when the weather turns foul or a dirt road kicks up dust. The refill is the replaceable rubber insert that slides into the existing wiper blade frame, giving fresh, sharp edges and a supple, graphite‑coated contact surface for streak‑free wiping. Choosing refills is cost‑effective, reduces waste, and preserves the original blade’s fit to the arm and windscreen curve.

For best visibility and safety, owners should treat wiper refills like any other service item. In Australian and New Zealand conditions—UV exposure, salt air near the coast, and outback dust—rubber hardens faster. A quick clean of the rubber edge and windscreen every few weeks with washer fluid or mild soapy water helps, while a replacement interval of about 12 months (or sooner if performance drops) is a good rule of thumb. Many shops check them at every service, that’s smart practice on a touring Pajero.

• Signs it’s time: streaks or haze, chatter or squeaks, missed patches, or cracked/frayed rubber edges.
• Handy tips: lift the arm gently, don’t let it snap to the glass, and wipe the rubber with a damp microfibre cloth to remove film.

Swapping refills is straightforward: measure the existing insert or check a reputable AU/NZ catalogue, slide the old insert out of the blade rails, transfer any thin metal backing strips if required, then feed the new refill into the guide channels until it locks. The rear wiper on wagon models often uses a narrower refill—match like‑for‑like. Quality inserts with graphite or silicone coatings tend to run quieter and last longer under harsh sun. If the frame is bent or corroded, step up to a complete blade assembly, then use refills thereafter.

Keep an eye on them at each service or every six months before a big trip, and this Pajero will keep its windscreen clear from city showers to high‑country slush.

Popular questions about 1998 Mitsubishi Pajero wiper refills

What size wiper refills does a 1998 Mitsubishi Pajero use?
Sizes can vary with body style and the blade brand fitted. The simplest way is to measure the existing inserts end‑to‑end and match the profile, or use a trusted AU/NZ parts catalogue to look up by rego or model. Fronts are typically conventional frame‑type blades that accept standard refill inserts, while the rear is usually shorter and slimmer.

How often should the wiper refills be replaced?
In local conditions, plan on about every 12 months, or sooner if you notice streaking, noise or hardening. Regularly cleaning the rubber and windscreen can stretch life, but heavy UV, coastal salt and dust will shorten it. Many owners pair refill replacement with an annual service for convenience.

Can the rear wiper take a refill insert as well?
Yes—most 1998 Pajero wagon rear wipers accept a narrower refill insert. Check the profile and length, as some aftermarket rear blades are sealed units. If the existing rear blade won’t open for an insert, replace the whole rear blade once, then use compatible refills next time.