Skip to content Skip to navigation menu

Your Selected Vehicle

CATEGORIES

Brands

Item Type

Price

Parts for your 1998 Mitsubishi Pajero-Brake hose

Sort by
Showing 1 - 1 of 1 products

1998 Mitsubishi Pajero Brake Hose — Purpose and Service Advice

Technical sources confirm that a brake hose is absolutely relevant and fitted to the 1998 Mitsubishi Pajero. The Mitsubishi workshop manual for the V2/V3/V4-series Pajero (Brake – Hydraulic section), the Mitsubishi ASA electronic parts catalogue (brake piping and hose listings), and common service guides such as Gregory’s/Max Ellery manuals all specify flexible brake hoses at each front caliper and a chassis-to-rear-axle flex hose. So, yes—this Pajero uses brake hoses, and they’re critical to safe stopping.

On this model, the brake hose is the flexible section of the hydraulic line that bridges the body to moving suspension and steering components. It handles wheel travel, steering lock-to-lock, and 4WD articulation, all while carrying high-pressure brake fluid. Without healthy hoses, pressure can be lost, braking can pull to one side, and the pedal may feel spongy.

For a 1998 Pajero that likely sees a mix of touring and off-road work, routine inspection is key. A good service routine includes checking hoses at every service or 10,000 km, and especially after off-road trips. Many techs recommend replacement at the first sign of ageing or by time—rubber hoses don’t last forever.

  • What to look for: cracking, weather checking, bulges, chafe marks, twists, wetness from fluid seepage, or rusted fittings.
  • When to act: if there’s any visible damage, uneven pad wear, pulling under brakes, or a soft pedal that doesn’t improve after a proper bleed.

Replacement tips for this Pajero are straightforward. Use quality ADR-compliant (AU) or LVVTA-compliant (NZ) parts. Always fit new copper crush washers at banjo connections, route the hose exactly like the factory setup (no twist), and verify full suspension travel and steering lock without tension. Bleed with the brake fluid grade shown on the reservoir cap (commonly DOT 3 or DOT 4), and refresh fluid every two years. Torque fasteners to the workshop manual specs rather than guessing.

Owners who lift their Pajero or run larger tyres should double-check hose length and routing