Parts for your 1998 Holden Barina-Pedal pads

1998 Holden Barina Pedal Pads

Pedal pads are absolutely used on the 1998 Holden Barina (SB series). This is confirmed by standard service literature and parts listings for its Opel Corsa B underpinnings, including the Holden/GM EPC (Electronic Parts Catalogue) which lists rubber covers for the brake (and clutch on manuals), the Holden Barina SB Workshop Manual (Gregory’s), and the Haynes Vauxhall/Opel Corsa 1993–2000 manual. Those sources all treat the rubber pedal cover as a routine service item.

On a ’98 Barina, pedal pads are the grippy rubber covers fitted over the metal pedal plates. They’re there to keep the driver’s foot planted, especially in the wet, and to meet the anti-slip expectations found in roadworthiness checks. Manual models have rubber pads on both the brake and the clutch, autos have one on the brake. The accelerator is typically a plastic tread and isn’t the same kind of replaceable rubber pad.

Because they’re rubber, pedal pads harden, glaze, or crack with age, and the grooves wear smooth. That’s when braking or clutch control can feel skittish—particularly with damp shoes. Replacing them is cheap, quick, and a good little safety upgrade on any SB Barina.

Most owners can tackle replacement at home. Warm the new pad in hot water to soften it, then hook the top lip over the pedal plate and work it on by hand. A tiny mist of silicone spray can help, but avoid oils that might stay slippery. Check that the rubber lip sits all the way around the metal plate—no corners folded under. It’s a 10-minute job per pedal.

• Inspect every service or 10,000 km.
• Replace if the grooves are smooth, the rubber is cracked, curled, or the pad feels loose.
• Use quality OEM or reputable aftermarket pads matched to SB Barina/Corsa B fitment.

Workshop manuals note these as consumables, if they’re borderline, most roadworthy checks will call them out. For drivers who do lots of urban start–stop or wet-weather commuting, keeping fresh pedal pads pays off in confidence and control. It’s small money for a big safety win.

• How can someone tell the Barina’s pedal pads need replacing?

If the rubber looks shiny or smooth, the grooves are faded, edges are cracked or curled, or a foot slips when damp, they’re due. Any looseness on the metal pedal plate is also a fail. Many owners replace them pre-emptively during a major service.

• Are manual and automatic Barina pedal pads the same?

Manual SB Barinas use the same style rubber pad on both brake and clutch. Automatics only have the brake pad. The accelerator uses a different plastic tread and isn’t swapped like the brake/clutch pads.

• Can universal pedal covers be used on a 1998 Barina?

Universal metal or decorative covers can reduce grip or foul mats if not fitted perfectly. For safety and roadworthiness, it’s best to use pads specifically listed for the SB Barina/Corsa B so the rubber fits tightly and keeps proper traction.