Your Selected Vehicle
Parts for your 1998 Daihatsu Terios-Headlight bulbs
Drivetech 4x4 Rocker Winch Switch Mom On/Off Mom On SPDT 12 or 24V Blue Illuminated (Contacts Rated 20A @ 12V) - DT-11007
Fitment Notes:
OEX Rocker Switch Mom On/Off Momentary On SPDT (Contacts Rated 16A @ 12 Or 24V) - ACX3716BL
Fitment Notes:
Explore 4WD & Adventure
OEX Mini Relay 12V 4 Pin Normally Open 40A (30 & 86 terminals are reversed) Resistor Protected, Sealed - ACX1966RBL
Fitment Notes:
Hella Ignition Switch Acc - Off - Acc/Ign - Start (Contacts Rated 25A @ 12V) - 4008
Fitment Notes:
LED Autolamps 10/30V Rear Position Marker 2 Red LEDs With 40cm Wire Blister Pack - 58RM
Fitment Notes:
Narva Automotive/Marine Battery Master / Isolation Switch (Contacts Rated 300A @ 12V) - 61044BL
Fitment Notes:
OEX Mini Battery Master / Isolation Switch SPST (Contacts Rated 100A @ 32V) - ACX3401BL
Fitment Notes:
OEX Rocker Switch On/Off SPST 12V Green Illuminated (Contacts Rated 10A @ 12V) - ACX3790
Fitment Notes:
Autel AC Wallbox EV Charger 22kw Three Phase Type 2 Cable with Wi-Fi & 4G in Dark Grey - MW22KW3PH-C
Fitment Notes:
OEX Integrated Spot Work Light / Amber Warning Light / Reverse Light 12V/24V SAE Class 1 - ACX5586
Fitment Notes:
OEX Ignition Switch Glow - Off - Acc/Ign - Start (Contacts Rated 30A @ 12V) - ACX3562
Fitment Notes:
Narva Sealed Metal Toggle Switch Off/On SPST (Contacts Rated 20A @ 12V) - 60070BL
Fitment Notes:
Replacing Headlight Bulbs for Your 1998 Daihatsu Terios
Changing the headlight bulbs on your 1998 Daihatsu Terios is a routine yet essential maintenance task that can keep you safe while driving, especially at night or in adverse weather conditions. This guide will walk you through the process of replacing headlight bulbs, helping you ensure that your Terios remains in top shape.
First, let's identify the type of headlight bulb your Terios uses. For most models of the 1998 Daihatsu Terios, you'll find the H4 type of bulb serves as the standard headlight. These bulbs combine both high and low beam functions into one compact unit, making them versatile and efficient for your needs.
- Gather Your Tools and Materials: Before you begin, make sure you have a replacement H4 bulb, gloves to protect your hands from heat and grease, and perhaps a screwdriver if your model requires it for access.
- Ensure Safety: Turn off your engine, remove the ignition key, and make sure your headlight switch is in the off position. Safety first is always key when dealing with vehicle maintenance.
- Access the Headlight Assembly: Open the bonnet and locate the back of the headlight assembly. You might need to remove a dust cover or connector to access the bulb. If there's a dust cover, gently remove it by either twisting it off or unclipping it.
- Remove the Old Bulb: Carefully disconnect the power connector from the back of the bulb. Release the securing clip, which holds the bulb in place, and gently remove the bulb itself. Be sure not to touch the glass of any bulbs with your bare fingers, as oils from your skin can shorten their life.
- Install the New Bulb: With clean hands or gloves, insert the new H4 bulb into the headlight assembly. Secure it with the clip and reattach the power connector. Replace the dust cover if applicable.
- Test Your New Headlight: Before you close the bonnet, turn on your ignition and switch on your headlights to ensure the new bulb is functioning properly. Check both high and low beams to confirm proper installation.
Maintaining your headlights isn't just a matter of personal convenience, it's a critical factor for safe driving. Regularly inspecting and replacing your vehicle's headlight bulbs as needed will ensure you maintain optimal visibility. Moreover, keeping a spare bulb in your car can save you time and hassle should one expire unexpectedly. By following this straightforward guide, you can confidently handle headlight bulb replacements on your Daihatsu Terios, keeping your driving experience safe and pleasant.