Your Selected Vehicle
Parts for your 1998 Daihatsu Terios-Headlight bulbs
Cole Hersee Toggle Switch Mom On - Off - Mom On - SPDT (Contacts Rated 25A @ 12V) - 55021BL
Fitment Notes:
Narva Heavy Duty Rocker Switch Off/Momentary On SPST (Contacts Rated 20A @ 12V) - 63050BL
Fitment Notes:
Explore 4WD & Adventure
Narva 9–33 Volt LED Light Guide Side Marker Lamp (Amber) With Chrome Cover - 92406
Fitment Notes:
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIMCSB
Fitment Notes:
Cole Hersee Rocker Switch On/Off SPST 12V Green Illuminated (Contacts Rated 25A @ 12V) - 58328-11BL
Fitment Notes:
OEX 39mm Dual Wall Heat Shrink Polyolefin with Adhesive Tubing Black 1.2M - ACX1297L
Fitment Notes:
OEX 2 B&S Battery Lead, Post to Stud, Length - 1,370mm, Stud Hole - 10mm - ACX1016
Fitment Notes:
Narva Sealed Rocker Switch Off/Momentary On SPST 12V Amber Illuminated (Contacts Rated 20A @ 12V) - 63126BL
Fitment Notes:
LED Autolamps Twin function front position with supplementary front indicator - 97CWIMCSB
Fitment Notes:
OEX 39mm Dual Wall Heat Shrink Polyolefin with Adhesive Tubing Red 1.2M - ACX1297RL
Fitment Notes:
Replacing Headlight Bulbs for Your 1998 Daihatsu Terios
Changing the headlight bulbs on your 1998 Daihatsu Terios is a routine yet essential maintenance task that can keep you safe while driving, especially at night or in adverse weather conditions. This guide will walk you through the process of replacing headlight bulbs, helping you ensure that your Terios remains in top shape.
First, let's identify the type of headlight bulb your Terios uses. For most models of the 1998 Daihatsu Terios, you'll find the H4 type of bulb serves as the standard headlight. These bulbs combine both high and low beam functions into one compact unit, making them versatile and efficient for your needs.
- Gather Your Tools and Materials: Before you begin, make sure you have a replacement H4 bulb, gloves to protect your hands from heat and grease, and perhaps a screwdriver if your model requires it for access.
- Ensure Safety: Turn off your engine, remove the ignition key, and make sure your headlight switch is in the off position. Safety first is always key when dealing with vehicle maintenance.
- Access the Headlight Assembly: Open the bonnet and locate the back of the headlight assembly. You might need to remove a dust cover or connector to access the bulb. If there's a dust cover, gently remove it by either twisting it off or unclipping it.
- Remove the Old Bulb: Carefully disconnect the power connector from the back of the bulb. Release the securing clip, which holds the bulb in place, and gently remove the bulb itself. Be sure not to touch the glass of any bulbs with your bare fingers, as oils from your skin can shorten their life.
- Install the New Bulb: With clean hands or gloves, insert the new H4 bulb into the headlight assembly. Secure it with the clip and reattach the power connector. Replace the dust cover if applicable.
- Test Your New Headlight: Before you close the bonnet, turn on your ignition and switch on your headlights to ensure the new bulb is functioning properly. Check both high and low beams to confirm proper installation.
Maintaining your headlights isn't just a matter of personal convenience, it's a critical factor for safe driving. Regularly inspecting and replacing your vehicle's headlight bulbs as needed will ensure you maintain optimal visibility. Moreover, keeping a spare bulb in your car can save you time and hassle should one expire unexpectedly. By following this straightforward guide, you can confidently handle headlight bulb replacements on your Daihatsu Terios, keeping your driving experience safe and pleasant.