Your Selected Vehicle
Parts for your 1998 Daihatsu Gran move-Headlights
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Explore 4WD & Adventure
LED Autolamps Front End Outline Marker White 12/24Vwith 2P plugs 10cm cable - 58WMB2P
LED Autolamps Twin function side indicator with amber/red side marker - 97ARIMB
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
LED Autolamps 12/24V Round Indicator Lamp With Clear Lens 130mm Diameter Recessed Mount - 102ACM
LED Autolamps 10/30V Front Outline Position Marker 4 White LEDs With 40cm Wire - 35WM
LED Autolamps 12/24V Stop/Tail Lamp With Reflector 14 LEDs Blister Package - 130RMG
LED Autolamps Multi Volt LED Licence Plate Lamp With Chrome Base Twin Blister - 30CLM
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly With 123 LEDs - 100BARWM
LED Autolamps Twin function rear position with supplementary rear indicator - 97RIMB
LED Autolamps Twin Function Stalk Side Indicator With Red/Amber Side Marker LHS Multivolt - 805ARIML
LED Autolamps MultiVolt R.H.S Stop/Tail/Indicator Assembly 128 Round LEDs - 125BARMR
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Chrome Bracket Blister Pack - 82CARRW
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIM
1998 Daihatsu Gran Move Headlights
Headlights are absolutely fitted to the 1998 Daihatsu Gran Move. This is supported by technical sources including the 1998 Daihatsu Pyzar/Gran Move owner’s manual and Daihatsu’s electronic parts catalog, which list complete headlamp assemblies and halogen bulbs for the model. Regulatory requirements such as Australia’s ADR 13/00 and New Zealand’s Vehicle Lighting Rule also mandate low- and high-beam headlamps for road use, so headlights are both relevant and required on this vehicle.
On the Gran Move, the headlights do the heavy lifting for safe night driving and poor-weather visibility, while making the car visible to others. Most examples use a combined high/low-beam halogen setup (commonly H4 in many markets), delivering a dependable beam pattern that’s easy to service and cost-effective to maintain.
As part of regular servicing, it’s smart to give the Gran Move’s headlights a once-over every 10,000 km or six months:
- Confirm bulb type in the glovebox manual before buying replacements, many cars of this era use H4 60/55 W halogen. Replace bulbs in pairs so beam colour and brightness match.
- Avoid touching the glass of a new halogen bulb. Use gloves or a clean tissue to prevent hot spots and early failure.
- If a headlight is out, check the relevant fuse and headlight relay before chasing wiring faults. Inspect earth points for corrosion.
- Restore cloudy or yellowed lenses with a quality plastic polish or a restoration kit. UV haze steals valuable brightness and can affect WOF/rego checks.
- Adjust headlight aim after any bulb or assembly change. Use the vertical and horizontal adjusters on the back of the housing, set the car on level ground, and aim to avoid dazzling oncoming traffic while keeping a sharp cutoff.
- If equipped with a headlight levelling dial in the cabin, set it correctly when carrying heavy loads.
- When replacing full headlight assemblies, be gentle with ageing plastic clips and fasteners—snug, not overtight, to avoid cracking the housing.
- Think carefully before fitting LED/HID retrofit bulbs into halogen housings. Many are not ADR/WOF compliant and can scatter light. Choose compliant halogen bulbs or certified assemblies.
Look after the lights and the Gran Move will repay the favour with clear, confidence-inspiring night vision.
FAQs
What headlight bulb does a 1998 Daihatsu Gran Move use?
Many Gran Move models use an H4 60/55 W halogen bulb for combined high/low beam. Variations exist by market, so it’s best to check the owner’s manual or read the markings on the existing bulb before purchasing.
How do you adjust the Gran Move’s headlight aim?
Park on level ground facing a wall about 3–5 metres away. Mark the headlight centre height on the wall, then use the vertical and horizontal adjusters on the lamp backs to set a clean cutoff just below the marked height, slightly dipped to the left for AUS/NZ to avoid glare. If unsure, a workshop can align them to spec quickly.
Are LED bulbs legal in the Gran Move’s halogen headlights?
Often not, unless the LED kit and housing are specifically approved and compliant. Non-compliant retrofits can fail WOF/rego and may produce poor beam patterns. Sticking with quality, ADR-compliant halogen bulbs—or upgrading to certified assemblies—is the safer bet.