Skip to content Skip to navigation menu

Your Selected Vehicle

Brands

Price

Parts for your 1997 Ford Falcon-Wiper blades

Sort by
Bar's Bugs Windscreen Cleaner 600ml - BB600
MULTI BUY

Bar's Bugs Windscreen Cleaner 600ml - BB600

$8
Fitment Notes:
See More
Trico Wiper Blades Refill 6mmx610mm Plastic - TRN61020

Trico Wiper Blades Refill 6mmx610mm Plastic - TRN61020

$21
Fitment Notes:
See More

Explore 4WD & Adventure

Bar's Bugs Windscreen Cleaner Super Concentrate 5L

Bar's Bugs Windscreen Cleaner Super Concentrate 5L

$45
Fitment Notes:
See More
Trico Vision Washer Additive 500ml - A90020

Trico Vision Washer Additive 500ml - A90020

$14
Fitment Notes:
See More
Bar's Bugs Windscreen Cleaner 375ml - BB375

Bar's Bugs Windscreen Cleaner 375ml - BB375

$8
Fitment Notes:
See More
Bar's Bugs Windscreen Cleaner Pre-Mix 3l - BBPM3

Bar's Bugs Windscreen Cleaner Pre-Mix 3l - BBPM3

$17
Fitment Notes:
See More
Reflector Triangle Red 440mm - 3 Pc - 84200

Reflector Triangle Red 440mm - 3 Pc - 84200

$140
Fitment Notes:
See More
Showing 1 - 16 of 16 products

Wiper Blades Replacement and Maintenance for Your 1997 Ford Falcon

Ensuring your wiper blades are in top-notch condition is crucial for maintaining clear visibility during wet weather conditions, and the 1997 Ford Falcon is no exception. Regular maintenance and timely replacement of the wiper blades can make a world of difference in your driving experience.

  • Choose the Right Size: The first step in maintaining your wiper blades is ensuring you have the correct size. The 1997 Ford Falcon typically requires 20-inch wiper blades for both the driver and passenger sides. However, always check your vehicle's manual or consult a trusted source to confirm the specific size needed for your model.
  • Regular Inspection: It's wise to frequently inspect your wipers for signs of wear and tear. Look for any cracks, tears, or stiffness in the rubber blades, as these can significantly reduce their effectiveness. If you notice any issues, it's time to consider a replacement.
  • Understanding the Wear Signs: Streaks on your windshield, unusual noises like squeaking, or skipping when the wipers operate are clear signs that your blades require attention. Don't ignore these signals - they're indicative of worn wipers that need replacing.

When replacing your wiper blades, it's a relatively straightforward process. Here's a simple guide to help you get started:

  1. Lift the Wiper Arm: Carefully lift your wiper arm away from the windshield. Be cautious to ensure it doesn't snap back against the glass.
  2. Detach the Old Blade: Most wiper blades are held in place by a small clip. Press this clip and slide the old blade off the arm. Each model might have slight variations, so examining the attachment carefully can help.
  3. Align the New Blade: Take your new wiper blade and position it at the end of the wiper arm. Slide it into place until you hear a click. This sound indicates it's securely fastened.
  4. Perform a Test: After replacing the blades, test them out. Ensure they're operating smoothly, without streaking or noise.

In addition to replacing your wiper blades, consider other maintenance tips to prolong their lifespan. Keep your windshield clean and free from debris that could wear down the blades more rapidly. During winter months, clear away frost and snow build-up manually instead of relying on your wipers to do the job.

With a little attention to detail and regular maintenance, your Ford Falcon's wiper blades will perform beautifully, ensuring you a safer driving experience regardless of the weather. Embrace these simple yet effective practices and enjoy a clear view from your car at all times.