Your Selected Vehicle
Parts for your 1997 Daihatsu Terios-Tail lights
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp With Reflex Reflectors Grey Base Blister Pack 1 pce - 100ARM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflector 150x80x22M - 151BAR
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9 - 33 Volt LED Rear Stop/Tail And Direction Indicator Lamp Kit (Red/Amber) - 94526
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflex Reflector 2 Pack - 151BAR2
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Assembly With 4 Lamps - 80BARRWM
Fitment Notes:
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
Fitment Notes:
Hella DuraLED Combi-S Heavy Duty 12/24V LED Stop/Tail/Indicator Lamp with6M Lead - 23786MBULK
Fitment Notes:
LED Autolamps 12/24V 16 LED Stop/Tail Indicator Lamp Black Bracket Blister Pack - 201BSTIM
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
Narva 9-33 Volt L.E.D Reverse Lamp White with Red L.E.D Tail Ring and Black Base - 94312
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Flood Pattern 4 LED Work Light - LEDWORK-C4-FLOOD
Fitment Notes:
Repco Wireless 1.5M Trailer Board With Rear Combination Lights 20 Metre Range - RTBW
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97010-1-D
Fitment Notes:
Maintaining and Replacing Tail-Lights on Your 1997 Daihatsu Terios
When it comes to ensuring your 1997 Daihatsu Terios stays both safe and stylish on the road, keeping an eye on the tail-lights is a crucial part of regular maintenance. Tail-lights play an essential role in not only illuminating your vehicle from the rear but also in conveying signals to other drivers when you brake or make turns. Given their importance, maintaining and replacing them when necessary is a key responsibility.
Start by routinely checking your tail-lights to ensure they're working properly. A quick walk-around your vehicle with someone operating the lights lets you spot any bulbs that have burnt out. Check for cracks or cloudiness in the lens which can drastically reduce the effectiveness of your lights.
- Replacement of Bulbs: If a bulb is burnt out, replacing it isn't too challenging. First, check your owner's manual for the appropriate bulb type. Typically, you'll need to access the tail-light assembly from the inside of the boot. This might involve removing a cover or panel to reach the bulbs. Carefully twist the bulb socket out of the assembly, replace the bulb, then reinstall the socket and any panel you might have removed.
- Lens and Housing Inspection: Over time, the tail-light lens could become cloudy or cracked. Cloudiness can often be polished out using specialized kits available at most automotive stores. If the lens is cracked, it's best to replace the entire assembly to prevent moisture from getting into intricate electrical components which can cause more severe damage.
- Wiring and Socket Checks: In some cases, the light might not be working due to issues with the wiring or socket. Check for any visible signs of wear such as fraying wires or corrosion on the socket. Cleaning the contacts with a bit of electrical cleaner can sometimes fix the issue. If not, professional assistance might be necessary.
In terms of maintaining the longevity and performance of your tail-lights, regular cleaning, especially during winter or after long drives in dusty conditions, helps keep them bright. Also, consider driving with your lights on during poor weather conditions to increase visibility.
Remember that properly functioning tail-lights ensure you're compliant with road safety regulations and help keep everyone safe. While a bit of elbow grease might be all that's needed to keep them shining, don't hesitate to consult a professional if you're unsure or the problem seems more complex. The peace of mind in ensuring your 1997 Daihatsu Terios is both visible and safe on the road is certainly worth it.