Your Selected Vehicle
Parts for your 1996 Daihatsu Gran move-Headlight bulbs
LED Autolamps 10/30V Chrome Series LED Red Amber Side Marker With 40cm Wire - 35CCARM
Explore 4WD & Adventure
LED Autolamps Twin function side indicator with amber/red side marker - 97CARIM
LED Autolamps Twin function front position with supplementary front indicator - 97WIMB
LED Autolamps Twin function side indicator with amber/red side marker - 97ARIMCSB
LED Autolamps Twin function side indicator with amber/red side marker - 97CARIMB
LED Autolamps 12V Round Indicator Lamp With Amber Lens Recessed Mount 130mm Diameter - 102A
LED Autolamps Twin function side indicator with amber side marker - 97AIMCSB
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
LED Autolamps Twin function front position with supplementary front indicator - 97CWIMCSB
LED Autolamps 12/24V Stop/Tail Lamp With Reflector 14 LEDs Blister Package - 130RMG
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIMB
LED Autolamps 12/24V Rear Indicator Light With Amber Lens Blister Pack - 113AMG
1996 Daihatsu Gran Move Headlight Bulbs
Headlight bulbs are absolutely relevant and fitted to the 1996 Daihatsu Gran Move. Technical references such as the Daihatsu Pyzar/Gran Move (G303/G311) owner’s handbook, Daihatsu EPC listings, and Australian/New Zealand bulb fitment guides from brands like Narva and Philips specify a halogen H4 (12V 60/55W) dual‑filament globe for both low and high beam in most trims for this model year. That makes headlight bulbs a normal wear item that owners should maintain as part of regular servicing.
On the Gran Move, the headlight bulb’s job is straightforward: provide clear, road-legal illumination so the driver can see and be seen, day or night. The H4 bulb handles both dipped and high beam via two filaments, working with the factory reflector to throw a consistent beam pattern that meets local WOF/roadworthy expectations in NZ and Australia.
Because halogen bulbs slowly dim with age before they fail, owners often don’t notice the drop in output. Replacing in pairs keeps the beam colour and brightness even across both sides. If the lights look yellow, the beam is patchy, or one side keeps blowing, it’s time for fresh globes and a quick check of the earths and connectors.
Replacing the H4 bulb on a Gran Move is reasonably straightforward. Pop the bonnet, unplug the three‑pin connector on the rear of the headlamp, release the rubber dust cover, and unclip the spring retainer. Swap in a new H4 bulb, taking care not to touch the glass with bare fingers—skin oils create hot spots and shorten life. Refit the clip, dust cover, and connector, then test low and high beam. It’s smart to confirm headlight aim after any replacement to avoid dazzling oncoming traffic.
Maintenance-wise, keep lenses clear and free of haze, a simple plastic lens restore kit can lift output noticeably. Inspect the headlight fuse and relay if bulbs fail prematurely, and look for moisture inside the housing, which can reduce bulb life. LED conversions are popular, but owners should only use ADR/UNECE‑compliant, road‑legal kits and confirm they suit the Gran Move’s reflector optics—otherwise the beam pattern can scatter and fail a WOF/roadworthy.
- Typical fitment: H4 12V 60/55W halogen (check handbook/vehicle label to confirm)
- Replace in pairs, avoid touching the glass
- Check aim, wiring earths, and lens clarity during service
Popular questions about 1996 Daihatsu Gran Move headlight bulbs
What headlight bulb type fits the 1996 Gran Move?
Most 1996 Gran Move (Pyzar) models use an H4 12V 60/55W dual‑filament halogen bulb for both low and high beam. Variants can differ, so it’s wise to confirm against the owner’s manual, the marking on the headlamp housing, or a trusted AU/NZ fitment guide before buying.
How often should the bulbs be replaced?
There’s no fixed interval, but many halogen bulbs fade noticeably by 2–4 years of regular use. Replace when output looks dull or at the first sign of colour shift. Doing both sides together keeps the beam even and avoids mismatched brightness.
Can LEDs be used instead of the standard halogen?
Yes, but only if the LED kit is road‑legal in Australia/NZ and designed for reflector housings like the Gran Move’s. The wrong kit can cause glare and a poor beam pattern. Always check compliance and have the aim re‑checked after fitting.