Your Selected Vehicle
Parts for your 1995 Suzuki Swift-Pedal pads
Explore 4WD & Adventure
1995 Suzuki Swift Pedal Pads
Based on the Suzuki Swift Workshop Manual for the early-to-mid 1990s models and the Suzuki Electronic Parts Catalogue (EPC) for Swift/Cultus platforms (including SF/GC/GA series), the 1995 Suzuki Swift is fitted with rubber pedal pads on the brake pedal, and on the clutch pedal for manual transmissions. The accelerator is typically a rigid treaded pedal without a removable rubber cover on many trims. These technical sources list dedicated “pedal rubber” items for the brake and clutch, confirming pedal-pads are relevant for this model year.
On a 1995 Suzuki Swift, pedal pads are the grippy rubber covers that sit over the metal brake (and clutch, if manual) pedal faces. They’re there to keep shoes from slipping, especially in the wet, and to make pedal feel more comfortable and consistent. Over time they harden, polish smooth, crack, or even start to walk off the pedal plate. That’s when stopping distances and control can be compromised. In Australia and New Zealand, a non-slip pedal surface is also a roadworthy/WoF expectation, so keeping them in good nick matters.
As part of regular servicing, it’s smart to check the pedal pads every 10,000–15,000 kilometres or at each service. Replace them if you notice:
- Shiny, slippery surfaces or worn-off tread pattern
- Cracks, splits, or missing chunks
- Edges not seated around the metal pedal plate
- Hardened rubber that feels plasticky
Swapping them is a quick DIY. Park safely, then pull the old pad off the metal pedal plate. Clean the pedal face of any grit and old rubber. Warm the new pad in hot water to make it more flexible. A dab of mild soapy water helps it slide on—avoid oils or silicone sprays that can leave the surface slippery. Hook the pad on from one side and work it around until the lip sits fully over the metal all the way around. Give the pedal a good press to confirm it doesn’t shift.
Manual Swift? Replace brake and clutch pads as a pair so grip and feel match. Automatic? You’ll usually only replace the brake pad. Genuine Suzuki parts or reputable aftermarket pads listed for the 1995 Swift will fit correctly and last well. It’s a small, inexpensive fix that pays off in pedal feel, confidence, and compliance.
Popular questions about 1995 Suzuki Swift pedal pads
How often should the pedal pads be replaced?
There’s no fixed time limit. Replace them whenever the tread is worn smooth, the rubber is cracked or hard, or the pad won’t stay seated. A quick inspection at each service is the easiest way to stay on top of it.
Are the brake and clutch pedal pads the same on a 1995 Swift?
On most 1995 Swift manuals, the brake and clutch use matching rubber pads. Always confirm against the Suzuki EPC or parts listing for your VIN. The accelerator typically isn’t a removable rubber pad on this model.
Can this be done at home without special tools?
Yes. It’s a straightforward job that usually needs no tools—just warm water and a bit of patience to seat the rubber lip properly. If the old pad is stubborn, a plastic trim tool can help pry it off without scratching the pedal.
