Your Selected Vehicle
Parts for your 1994 Toyota Hilux surf-Tail lights
LED Autolamps 12/24V LED Stop/Tail/Indicator Lamp With Reflex Reflector Blister Pack 1 pce - 150ARM
Fitment Notes:
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
Fitment Notes:
LED Autolamps 12/24V 280 Mini Jumbo Stop/Tail/Indicator Lamp Blister Pack - 280ARRM
Fitment Notes:
Hella 12/24V LED Stop/Tail/Indicator/Number Plate Lamp with 6M Lead - 23956MBULK
Fitment Notes:
LED Autolamps 12/24V 16 LED Stop/Tail Indicator Lamp Black Bracket Blister Pack - 201BSTIM
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
Fitment Notes:
Narva Model 72 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9 - 33 Volt LED Rear Stop/Tail And Direction Indicator Lamp Kit (Red/Amber) - 94526
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflex Reflector 2 Pack - 151BAR2
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Assembly With 4 Lamps - 80BARRWM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Fitment Notes:
Hella DuraLED Combi-S Heavy Duty 12/24V LED Stop/Tail/Indicator Lamp with6M Lead - 23786MBULK
Fitment Notes:
LED Autolamps 174 Series Stop/Tail/Indicator Lamp 12/24V, Surface Mount, 40cm Cable - 174ARMB
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
Fitment Notes:
Stedi C-4 Black Edition Flush Mount 4 LED Work Light Flood Beam - LEDFLUSH-C4-FLOOD
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Fitment Notes:
Narva 9-33 Volt L.E.D Reverse Lamp White with Red L.E.D Tail Ring and Black Base - 94312
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Flood Pattern 4 LED Work Light - LEDWORK-C4-FLOOD
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
1994 Toyota Hilux Surf Tail-Lights Replacement and Maintenance
Keeping your 1994 Toyota Hilux Surf in top condition involves regular maintenance of various components, and tail-lights are no exception. The tail-lights are crucial for safe driving, as they ensure your vehicle is visible to other drivers at night and during poor weather conditions. This is why maintaining them is an essential part of your vehicle servicing routine.
When it comes to replacing tail-lights on your Hilux Surf, the first step is to identify the type of bulb and housing used in your specific model. The 1994 model typically requires standard incandescent bulbs, but some might have been retrofitted with LED bulbs for enhanced brightness and longevity.
- To begin the replacement process, make sure your vehicle is parked on a level surface and the ignition is off. For safety, disconnect the negative terminal of the battery to prevent any electrical mishaps.
- Access the rear of the tail-light assembly - this often involves removing the interior panels of the cargo area of your Hilux Surf.
- Once you have access, you'll typically need to unfasten a few screws or clips to remove the tail-light housing. Be gentle to avoid cracking the plastic components.
- With the housing removed, replace the old bulb with a new one. It's a good idea to handle the new bulb with gloves or a cloth to prevent any oils from your skin from shortening the bulb's life.
- Reassemble the tail-light and any removed panels, ensuring everything is securely fastened. Reconnect the battery and test to confirm the new tail-light functions properly.
It's worth checking both tail-lights even if only one is faulty, as this can preempt future failures. Regular inspections can prevent minor issues from becoming costly repairs down the line. Look for signs of moisture inside the tail-light housing, as this can indicate a seal failure, which might lead to more significant problems such as electrical shorts.
Cleaning the tail-light lenses during your regular car washes can boost visibility. Over time, lenses can become cloudy or scratched. You might want to use a lens restoration kit if you notice diminished clarity in the lenses.
Don't overlook these small details during routine maintenance, as well-functional tail-lights play a crucial role in keeping you and others safe on the road. They might not always be the first thing to come to mind in auto upkeep, but they're indispensable for safe and compliant driving.