Your Selected Vehicle
Parts for your 1989 Suzuki Jimny-Headlights
OEX 500 Lumen Rechargeable LED Flood Light with Bluetooth Speaker - LLX3008
Fitment Notes:
Explore 4WD & Adventure
OEX 3mm Twin Core Automotive Cable, Figure 8, Red With Black Trace - 4m Roll (NZ Ref.151) - ACX0802-4M
Fitment Notes:
OEX Rocker Surface Mount Switch On/Off SPST 12V Blue Illuminated (contacts Rated 30A @ 12V) - ACX1973BL
Fitment Notes:
Narva 3 Position Ignition Switch With Push For Choke Function (Contacts Rated 5A @ 12V) - 64008
Fitment Notes:
OEX Standard Blade In Line Fuse Holder, Red, 1 Way, 35A - Single Pack - ACX1711RBL
Fitment Notes:
Narva Rocker Switch Off/On DPST Red LED (Contacts Rated 20A @ 12V) - 63026BL
Fitment Notes:
OEX Crimp Terminal Female Blade Red Terminal Entry 6.3 x 0.8mm Vinyl 100 Pce - ACX3022
Fitment Notes:
Maintaining and Replacing Headlights on Your 1989 Suzuki Jimny
The 1989 Suzuki Jimny is a classic little off-roader that packs a punch with its rugged charm and reliable performance. A key part of keeping this vehicle roadworthy and safe is ensuring that its headlights are in top condition. Let's take a look at some helpful tips and considerations for replacing and maintaining the headlights on your 1989 Suzuki Jimny.
Headlights are crucial components providing visibility during night-time driving and in poor weather conditions. If you've noticed your headlights have dimmed or have stopped working altogether, it may be time to replace them. This process, while generally straightforward, requires careful attention to detail to ensure your Jimny's lights function optimally. The headlights on the 1989 Suzuki Jimny are typically sealed beam units which may need whole-unit replacement, unlike modern vehicles that only require bulb changes. Here are some steps and tips to guide you:
- Gather the Right Tools and Parts: Before starting, ensure you have the correct replacement sealed beam headlights specific to the 1989 Jimny model. Having a screwdriver and gloves will also ease the process.
- Removing the Existing Headlights: Carefully remove any screws or clips surrounding the headlight assembly. This usually involves taking off the front grille or trim pieces to expose the housing. Handle these components gently to avoid causing any unintentional damage.
- Disconnect the Wiring: Once the housing is accessible, gently disconnect the wiring harness from the back of the headlight. Make sure not to tug too hard which might damage the wires.
- Replace the Headlight: Remove the old headlight from the housing and fit the new sealed beam unit securely. Reconnect the wiring harness, making sure it clicks back into place firmly.
- Reassemble the Headlight Housing: Once the new headlight is secured, reattach any trim or grille pieces you removed earlier. Tighten any screws cautiously to ensure a firm fit.
While replacing headlights might seem daunting at first, regular maintenance is fairly straightforward. Make it a point to check your headlights periodically:
- Ensure that the lenses are clean and free of scratches or clouding which can affect light projection.
- Check for any moisture inside the headlight housing to prevent corrosion or electrical issues.
- Verify that the headlights are aligned correctly, as misalignment can reduce road visibility and dazzle oncoming traffic.