Your Selected Vehicle
Parts for your 1989 Suzuki Jimny-Headlights
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
OEX Integrated Spot Work Light / Amber Warning Light / Reverse Light 12V/24V SAE Class 1 - ACX5586
Fitment Notes:
OEX 2 B&S Battery Lead, Post to Stud, Length - 1,525mm, Stud Hole - 10mm - ACX1017
Fitment Notes:
Drivetech 4x4 Rocker Winch Switch Mom On/Off Mom On SPDT 12 or 24V Blue Illuminated (Contacts Rated 20A @ 12V) - DT-11007
Fitment Notes:
OEX 2mm Twin Core Speaker Cable, Figure 8, Grey With Black Trace - 30m Roll - ACX0800
Fitment Notes:
Drivetech 4x4 Rocker AUX Lights Switch On/Off SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V) - DT-11013
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 10/30V Rear Position Marker 2 Red LEDs With 40cm Wire Blister Pack - 58RM
Fitment Notes:
OEX Battery Master / Isolation Switch On/Off SPST (Contacts Rated 250A @ 12V) - ACX3424
Fitment Notes:
LED Autolamps 385 Series Rear Combination Lamp RHS with 7 core plug - 385ARWMRCSB
Fitment Notes:
Stedi FX3300 LED Torch 3300 Lumens 362m Beam Rechargeable Battery - TORCH-FX3300
Fitment Notes:
OEX 3mm Twin Core Automotive Cable, Red/Black, With Black Sheath - 30m Roll (NZ Ref.151) - ACX0806
Fitment Notes:
LED Autolamps 12V Indicator Strip Lamp With 10 Square LEDs Recessed Mount - 235A12
Fitment Notes:
Maintaining and Replacing Headlights on Your 1989 Suzuki Jimny
The 1989 Suzuki Jimny is a classic little off-roader that packs a punch with its rugged charm and reliable performance. A key part of keeping this vehicle roadworthy and safe is ensuring that its headlights are in top condition. Let's take a look at some helpful tips and considerations for replacing and maintaining the headlights on your 1989 Suzuki Jimny.
Headlights are crucial components providing visibility during night-time driving and in poor weather conditions. If you've noticed your headlights have dimmed or have stopped working altogether, it may be time to replace them. This process, while generally straightforward, requires careful attention to detail to ensure your Jimny's lights function optimally. The headlights on the 1989 Suzuki Jimny are typically sealed beam units which may need whole-unit replacement, unlike modern vehicles that only require bulb changes. Here are some steps and tips to guide you:
- Gather the Right Tools and Parts: Before starting, ensure you have the correct replacement sealed beam headlights specific to the 1989 Jimny model. Having a screwdriver and gloves will also ease the process.
- Removing the Existing Headlights: Carefully remove any screws or clips surrounding the headlight assembly. This usually involves taking off the front grille or trim pieces to expose the housing. Handle these components gently to avoid causing any unintentional damage.
- Disconnect the Wiring: Once the housing is accessible, gently disconnect the wiring harness from the back of the headlight. Make sure not to tug too hard which might damage the wires.
- Replace the Headlight: Remove the old headlight from the housing and fit the new sealed beam unit securely. Reconnect the wiring harness, making sure it clicks back into place firmly.
- Reassemble the Headlight Housing: Once the new headlight is secured, reattach any trim or grille pieces you removed earlier. Tighten any screws cautiously to ensure a firm fit.
While replacing headlights might seem daunting at first, regular maintenance is fairly straightforward. Make it a point to check your headlights periodically:
- Ensure that the lenses are clean and free of scratches or clouding which can affect light projection.
- Check for any moisture inside the headlight housing to prevent corrosion or electrical issues.
- Verify that the headlights are aligned correctly, as misalignment can reduce road visibility and dazzle oncoming traffic.