Your Selected Vehicle
Parts for your 1988 Mitsubishi Pajero-Headlight bulbs
Repco 12V LED Rear Combination Lamp Stop / Tail / Indicator / Licence Plate Pair 100x100x25mm - RLT100LBL2S3
Fitment Notes:
Repco 12V LED RearCombination Lamp Stop / Tail / Indicator / Licence Plate Pair 150x80x25mm - RLT150LBL2S3
Fitment Notes:
Repco 12V LED Rear Combination Lamp Stop / Tail / Indicator Pair 100x100x25mm - RLT100BL2S3
Fitment Notes:
Repco 12V LED Rear Combination Lamp Stop / Tail / Indicator Pair 150x80x25mm - RLT150BL2S3
Fitment Notes:
Explore 4WD & Adventure
Repco 12-24V LED Amber/Red Side Marker / Indicator Lamp 58x35x25mm - RLMARBLS3
Fitment Notes:
Repco 12-24V LED Red Rear Outline Marker Lamp 58x35x25mm - RLMRBLS3
Fitment Notes:
Aerpro Clamp Type Bull Bar UHF CB Antenna Bracket Horizontal Or Vertical Mounting Hose Clamp Size - 40-64mm - CBBB2
Fitment Notes:
LED Autolamps 12/24V Maxilamp Stop/Tail/Indicator/Reverse/Reflector Combo Lamp Black Chrome - MAXILAMPC3XRWB
Fitment Notes:
Stedi Hyper LED Flood Lights 8 Inch 60W 6000K Colour 5400 Lumens - LEDHYPR-8-60W
Fitment Notes:
OEX 500 Lumen Rechargeable LED Flood Light with Bluetooth Speaker - LLX3008
Fitment Notes:
LED Autolamps Stop/Tail Indicator With 18 Square LEDs Multi Volt Blister - 35ARM
Fitment Notes:
Maintaining and Replacing Headlight Bulbs on Your 1988 Mitsubishi Pajero
The 1988 Mitsubishi Pajero has proven itself to be a reliable and rugged vehicle over the years, and ensuring proper maintenance is key to keeping it in good condition. One of the important aspects that shouldn't be overlooked is the vehicle's headlight bulbs. This is not only crucial for your safety during night-time driving or in poor weather conditions, but it also ensures compliance with legal vehicle requirements. Replacing or maintaining the headlight bulbs on the 1988 Mitsubishi Pajero is relatively straightforward and can be done with some basic tools.
First things first, it's important to know the type of bulbs your Pajero uses. For the 1988 model, the headlight assemblies typically use Halogen bulbs. You'll want to ensure that you purchase the right size and type of bulb for your vehicle, as using the incorrect type can affect visibility and potentially cause issues with your electrical system. Replacement bulbs are readily available in automotive part stores.
- Before you start, make sure your vehicle is turned off and the headlights are switched off. It's always a good idea to disconnect the battery whenever you're dealing with electrical components to prevent any accidents.
- To access the headlight bulb, open the bonnet and locate the back of the headlight assembly. You'll likely need to remove the protective dust cover, which should be done with care to avoid damaging it.
- Once the cover is removed, you'll see the headlight bulb connected to a power socket. Gently twist and pull the bulb out of the socket. Be cautious here, if the bulb was recently used, it might still be hot.
- After removing the old bulb, take the new bulb and align it properly in the socket. Avoid touching the glass part of the new bulb with your fingers as oils from your skin can shorten the lifespan of the bulb. If you do touch the glass, be sure to clean it with a soft cloth before installation.
- Once the new bulb is securely in place, replace the dust cover and reconnect the battery if it was disconnected. Turn on the headlights to ensure they are working properly before you close the bonnet.
Regular maintenance of your Pajero's headlight system is an excellent way to ensure optimal performance and driving safety. Consider checking the alignment and cleanliness of the headlight reflectors and lenses, as dirt and misalignment can significantly reduce light output. Keeping an eye on the condition of your headlight bulbs and replacing them as needed will not only make your night-time drives safer but will also keep your Pajero in top shape for many more years to come.