Your Selected Vehicle
Parts for your 1988 Mitsubishi Pajero-Headlight bulbs
Explore 4WD & Adventure
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIMCSB
Fitment Notes:
OEX 2 B&S Battery Lead, Post to Stud, Length - 1,370mm, Stud Hole - 10mm - ACX1016
Fitment Notes:
Narva Sealed Rocker Switch Off/Momentary On SPST 12V Amber Illuminated (Contacts Rated 20A @ 12V) - 63126BL
Fitment Notes:
Narva Crimp Terminal Ring Brass Terminal Entry 6.3mm Non Insulated 100 Pce - 56236
Fitment Notes:
Cole Hersee Toggle Switch Mom On - Off - Mom On - SPDT (Contacts Rated 25A @ 12V) - 55021BL
Fitment Notes:
Narva Heavy Duty Rocker Switch Off/Momentary On SPST (Contacts Rated 20A @ 12V) - 63050BL
Fitment Notes:
OEX 39mm Dual Wall Heat Shrink Polyolefin with Adhesive Tubing Red 1.2M - ACX1297RL
Fitment Notes:
Cole Hersee Rocker Switch On/Off SPST 12V Green Illuminated (Contacts Rated 25A @ 12V) - 58328-11BL
Fitment Notes:
Maintaining and Replacing Headlight Bulbs on Your 1988 Mitsubishi Pajero
The 1988 Mitsubishi Pajero has proven itself to be a reliable and rugged vehicle over the years, and ensuring proper maintenance is key to keeping it in good condition. One of the important aspects that shouldn't be overlooked is the vehicle's headlight bulbs. This is not only crucial for your safety during night-time driving or in poor weather conditions, but it also ensures compliance with legal vehicle requirements. Replacing or maintaining the headlight bulbs on the 1988 Mitsubishi Pajero is relatively straightforward and can be done with some basic tools.
First things first, it's important to know the type of bulbs your Pajero uses. For the 1988 model, the headlight assemblies typically use Halogen bulbs. You'll want to ensure that you purchase the right size and type of bulb for your vehicle, as using the incorrect type can affect visibility and potentially cause issues with your electrical system. Replacement bulbs are readily available in automotive part stores.
- Before you start, make sure your vehicle is turned off and the headlights are switched off. It's always a good idea to disconnect the battery whenever you're dealing with electrical components to prevent any accidents.
- To access the headlight bulb, open the bonnet and locate the back of the headlight assembly. You'll likely need to remove the protective dust cover, which should be done with care to avoid damaging it.
- Once the cover is removed, you'll see the headlight bulb connected to a power socket. Gently twist and pull the bulb out of the socket. Be cautious here, if the bulb was recently used, it might still be hot.
- After removing the old bulb, take the new bulb and align it properly in the socket. Avoid touching the glass part of the new bulb with your fingers as oils from your skin can shorten the lifespan of the bulb. If you do touch the glass, be sure to clean it with a soft cloth before installation.
- Once the new bulb is securely in place, replace the dust cover and reconnect the battery if it was disconnected. Turn on the headlights to ensure they are working properly before you close the bonnet.
Regular maintenance of your Pajero's headlight system is an excellent way to ensure optimal performance and driving safety. Consider checking the alignment and cleanliness of the headlight reflectors and lenses, as dirt and misalignment can significantly reduce light output. Keeping an eye on the condition of your headlight bulbs and replacing them as needed will not only make your night-time drives safer but will also keep your Pajero in top shape for many more years to come.