Your Selected Vehicle
Parts for your 1988 Mitsubishi Pajero-Headlight bulbs
OEX 5mm Single Core Tinned Marine Cable, Yellow- 100m Roll (NZ Ref. 154M) - ACX0892
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12/24V Red Emergency Lamp 14 Flash Patterns With Sync Wire - 120035RM
Fitment Notes:
OEX 4mm Single Core Tinned Marine Cable, Brown - 100m Roll (NZ Ref. 152M) - ACX0991
Fitment Notes:
OEX 4mm Single Core Automotive Cable, White With Brown Trace - 100m Roll (NZ Ref. 152) - ACX0744L
Fitment Notes:
OEX 4mm Single Core Automotive Cable, Orange With Blue Trace - 100m Roll (NZ Ref.152) - ACX0749L
Fitment Notes:
LED Autolamps 12/24V Round Indicator Lamp With Clear Lens 130mm Diameter Recessed Mount - 102ACM
Fitment Notes:
Amphenol 50A Genuine Heavy-Duty Power Connector, Grey - 5 Pairs with Terminals - AXC508H6-10
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Licence Plate Lamp With Reflector - 149BARL4P
Fitment Notes:
Maintaining and Replacing Headlight Bulbs on Your 1988 Mitsubishi Pajero
The 1988 Mitsubishi Pajero has proven itself to be a reliable and rugged vehicle over the years, and ensuring proper maintenance is key to keeping it in good condition. One of the important aspects that shouldn't be overlooked is the vehicle's headlight bulbs. This is not only crucial for your safety during night-time driving or in poor weather conditions, but it also ensures compliance with legal vehicle requirements. Replacing or maintaining the headlight bulbs on the 1988 Mitsubishi Pajero is relatively straightforward and can be done with some basic tools.
First things first, it's important to know the type of bulbs your Pajero uses. For the 1988 model, the headlight assemblies typically use Halogen bulbs. You'll want to ensure that you purchase the right size and type of bulb for your vehicle, as using the incorrect type can affect visibility and potentially cause issues with your electrical system. Replacement bulbs are readily available in automotive part stores.
- Before you start, make sure your vehicle is turned off and the headlights are switched off. It's always a good idea to disconnect the battery whenever you're dealing with electrical components to prevent any accidents.
- To access the headlight bulb, open the bonnet and locate the back of the headlight assembly. You'll likely need to remove the protective dust cover, which should be done with care to avoid damaging it.
- Once the cover is removed, you'll see the headlight bulb connected to a power socket. Gently twist and pull the bulb out of the socket. Be cautious here, if the bulb was recently used, it might still be hot.
- After removing the old bulb, take the new bulb and align it properly in the socket. Avoid touching the glass part of the new bulb with your fingers as oils from your skin can shorten the lifespan of the bulb. If you do touch the glass, be sure to clean it with a soft cloth before installation.
- Once the new bulb is securely in place, replace the dust cover and reconnect the battery if it was disconnected. Turn on the headlights to ensure they are working properly before you close the bonnet.
Regular maintenance of your Pajero's headlight system is an excellent way to ensure optimal performance and driving safety. Consider checking the alignment and cleanliness of the headlight reflectors and lenses, as dirt and misalignment can significantly reduce light output. Keeping an eye on the condition of your headlight bulbs and replacing them as needed will not only make your night-time drives safer but will also keep your Pajero in top shape for many more years to come.