Parts for your 1987 Suzuki Swift-Wiper blades

1987 Suzuki Swift Wiper Blades — Fitment, Purpose, and Easy Service Tips

Wiper blades are absolutely fitted to the 1987 Suzuki Swift. This is confirmed by period factory literature (Suzuki Swift/Cultus Service Manual, 1986–1988, Body Electrical: Wiper/Washer System) and mandatory roadworthiness requirements such as Australia’s ADR 15 Windscreen Wipers and Washers and New Zealand’s WOF visibility standards, all of which require operational windscreen wipers on passenger cars. Many 1987 Swift hatchbacks also left the factory with a rear wiper.

On a 1987 Swift, the wiper blades do the simple but vital job of clearing water, road grime, and coastal salt spray from the glass so visibility stays sharp. Aussie sun and Kiwi UV can harden the rubber over time, while winter road film and dust accelerate wear. If the blades chatter, smear, or leave streaks, the driver’s view is compromised — not ideal in a downpour or when a truck throws back spray on the motorway.

As part of regular servicing of your 1987-suzuki-swift wiper-blades, it’s smart to clean the edges monthly with mild soapy water, rinse, and finish with a quick wipe of isopropyl alcohol to lift road film. Avoid running wipers on a dry screen, and don’t yank them across ice or baked-on dust. Most owners will benefit from replacing the rubber inserts or full blade assemblies every 6–12 months, sooner if parked outside or driven near the coast. Choose quality rubber or silicone refills and ensure the blade sits evenly across the glass with good arm spring tension.

Fitment on many early Swifts uses a common hook-style arm (often 9x3 mm), and the hatch may have a specific rear blade assembly. Beam-style upgrades can improve wipe pressure and reduce wind lift, provided the adaptor suits the Swift’s arms. If unsure, measure the existing blades, check the owner’s handbook, or use a parts catalogue that lists the 1987 model year. A quick inspection during each service keeps things tidy and road-legal.

• Replace if you see streaks, missed patches, cracks, or frayed edges.
• Clean the screen and blades regularly, top up washer fluid with a proper cleaner.
• Check arm tension and that the blades park correctly, adjust or replace as needed.

Look after the wipers and that tidy little Swift stays confident in foul weather, with clear vision right when it counts.

Popular questions about 1987 Suzuki Swift wiper blades

What size wiper blades fit a 1987 Suzuki Swift?
The exact lengths can vary by body style and arm type. Many early Swifts use a J-hook (often 9x3 mm) front arm, with common catalogue lengths around the mid-to-high teens in inches for the windscreen and a shorter dedicated rear blade on hatchbacks. It’s best to measure what’s on the car or check a trusted parts guide for the 1987 model to confirm.

How often should the blades be replaced?
Plan on every 6–12 months, or sooner if there’s streaking, squeaking, cracks, or a rough rubber edge. Outdoor parking, strong UV, salt air, and lots of rainy-day driving will shorten their life, so inspect at each service.

Can the rear wiper be upgraded like the fronts?
Front blades often accept modern beam-style replacements if the adaptor matches the arm. The rear is commonly a specific assembly or refill shaped for the hatch glass, many suppliers offer direct-fit rear options for an easy swap.