Parts for your 1987 Mitsubishi Pajero-Wiper blades

1987 Mitsubishi Pajero Wiper Blades

The 1987 Mitsubishi Pajero absolutely uses wiper blades. Factory documentation such as the Mitsubishi Pajero/Montero/Shogun Workshop Manual (1982–1991), Group 51 “Wiper and Washer,” and common service guides like the Haynes Repair Manual for Mitsubishi Pajero/Montero 1983–1991 describe the front windscreen wiper system and its maintenance. Mitsubishi’s electronic parts catalogues for the L040-series also list front wiper blade assemblies and, on wagon/hardtop variants, a rear wiper blade. So, wiper blades are standard equipment on this model and are very much relevant to servicing.

On a classic like the ’87 Pajero, wiper blades do a simple job that matters heaps: keep the windscreen clear of rain, road grime, bulldust, and salty spray, so the driver can see what’s ahead whether it’s the Hume, the Desert Road, or a bush track after a downpour. Good blades sweep smoothly without juddering, don’t leave streaks, and won’t chatter across the glass. When they’re tired, they smear, miss patches, or squeak—signs it’s time for a refresh.

As part of regular servicing, Pajero owners should treat wiper blades like consumables. In Aussie and Kiwi conditions—UV, heat, coastal air, and frequent off‑road dust—rubber can harden or crack faster than expected. Replacing blades every 6–12 months is a fair rule of thumb, sooner if the vehicle sees a lot of sun or outback work. Many first‑gen Pajeros use a standard hook‑type wiper arm up front, some body styles and markets differ, and wagon models commonly have a shorter rear blade on the tailgate. Measuring the existing blades or checking the owner’s manual or parts catalogue is the safest bet before ordering.

• Clean the windscreen and blade edges regularly with mild car wash or glass cleaner to stop grit from chewing the rubber.
• Top up washer fluid with proper screenwash, avoid straight tap water where possible to reduce mineral build‑up and algae.
• Inspect for nicks, cracks, or a rounded wiping edge, replace at the first sign of streaking or skipping.
• After mud or red dust, rinse the windscreen and blades before wiping to prevent scratching.
• Check the wiper arms for proper tension and that the pivot joints move freely, weak spring pressure can mimic a bad blade.
• If parked outside, lift blades off the glass during extreme heat or long storage to reduce flat‑spotting.

Swapping blades is quick and cheap, and it pays off every time the weather turns. Keeping the wipers spot‑on is a small job that makes a big difference to safety in an older 4x4.

What size wiper blades fit a 1987 Mitsubishi Pajero?

Most first‑gen Pajeros take equal‑length front blades, commonly around the mid‑to‑upper‑teen inches, with a shorter rear blade on wagon/hardtop models. Because arm styles and market trims vary, the smart move is to measure the existing blades or confirm via the owner’s manual or a Mitsubishi parts listing for the exact body code.

How often should the wiper blades be replaced on an ’87 Pajero?

Plan on every 6–12 months. In hot, sunny, coastal, or dusty conditions typical of Australia and New Zealand, rubber ages quicker, so earlier replacement is wise—especially after heavy off‑road trips. Replace immediately if streaking, squeaking, or missed patches appear.

Does the 1987 Pajero have a rear wiper?

Many wagon and hardtop variants came with a rear wiper from factory, but cab‑chassis and some soft‑top styles did not. If the vehicle has a tailgate glass with a wiper arm fitted, use the shorter rear blade size specified for that body style.