Your Selected Vehicle
Parts for your 1985 Suzuki Swift-Headlights
Projecta Battery Terminal End Entry Small Post Japanese Style Negative 1 Pce - BT36-N1
Fitment Notes:
Explore 4WD & Adventure
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
LED Autolamps 12/24V Maxilamp Stop/Tail/Indicator/Reflector Single Lamp - MAXILAMP1XRE
Fitment Notes:
LED Autolamps 12/24V LED Rear Combination Stop/Tail/Indicator/Reverse Light with Reflectors, Blister Pack - 250ARWM
Fitment Notes:
Drivetech 4x4 Rocker 4 Switch Panel On - Off - SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V) - DT-11030
Fitment Notes:
LED Autolamps 12/24V White Emergency Lamp Flash Patterns With Sync Wire - 120033WM
Fitment Notes:
OEX 15A Mini Manual Reset Circuit Breaker, Type 3, Switchable - Single Pack - ACX2081BL
Fitment Notes:
Icon Battery Terminal Heavy Duty Side Entry Solder Type 12mm Positive 1 Pce - BT3-12POS
Fitment Notes:
Headlights Maintenance and Replacement for Your 1985 Suzuki Swift
Maintaining the headlights on your 1985 Suzuki Swift is crucial for ensuring safety and visibility while driving. It's important to regularly inspect and service your vehicle's headlights to keep them in optimal condition.
Let's start with the basics. The headlights on a 1985 Suzuki Swift are typically sealed beam units. This means that the bulb, lens, and reflector are all part of a single unit. Although these types of headlights may seem dated compared to modern systems with replaceable bulbs, they are quite straightforward when it comes to upkeep and replacement.
Here's a simple guide on how to replace the headlights on your Suzuki Swift:
- Gather Your Tools: You will need some basic tools such as a screwdriver and possibly a wrench. Ensure you have the correct replacement headlights, usually accessible through auto parts retailers.
- Remove the Headlight Bezel: Open the bonnet and locate the headlight assembly. The first step is to remove the headlight bezel, which is the outer cover. This is generally held in place with screws that need to be carefully taken out.
- Disconnect the Wiring: Before you can fully remove the headlight assembly, you will need to disconnect the wiring. Look for the connector at the back of the headlight and gently unplug it.
- Remove and Replace the Headlight: Take out the retaining ring or screws that secure the headlight in place. Slide the old headlight out and position the new one in its place. Attach it securely using the retaining ring or screws.
- Reconnect the Wiring and Install the Bezel: Once the new headlight is fitted, plug the connector back into the headlight and ensure it is securely attached. Finally, reinstall the headlight bezel to complete the process.
Performing this maintenance task on your own can be quite satisfying, plus it ensures you're familiar with your vehicle's requirements. Always inspect your headlights periodically for any signs of wear or failure, such as foggy lenses, dimming, or flickering. If you notice any of these issues, it might be time to give your headlights some attention.
Remember, maintaining your headlights not only ensures clarity of vision during night drives but also contributes to road safety by making your vehicle more visible to others. While it might be tempting to delay maintenance, proactively addressing headlight concerns will save you time and potential hassle in the long run.