Tridon Flasher 24V 2 Pin - EG22

Tridon Flasher Can or Relay keeps your indicators working

Tridons range of flasher cans or relays keep vehicle indicators working. The flasher is the heart of the system and makes the front and rear indicator lamps flash on and off in a steady sequence. It also controls the hazard lights. Most flasher relays or cans are load sensitive so if an indicator lamp fails on one side of the car, that side will flash on and off faster than the side with all globes working. This lets the driver know of the problem. Besides making lights flash it produces an audible sound inside the car to let you know the indicators or hazard lights are working. Apart from blown lamps, some common problems are flashing to slow, an irregular flash or no audible sound. Most of these issues can be fixed by replacing the flasher can or relay. It is important to pick the correct flasher for your vehicle. Changing them over is not difficult. Getting to the flasher to change them over is the hard part as most are located under the dash in hard to reach places.

Flashers work by interupting the flow of electricity to the lamps causing them to turn off and on at a steady rate. Most flasher relays or cans fit into 3 different types, electro-mechanical, thermal and electronic. There are flashers that now work with LED lights as these are becoming more commonplace in the vehicle car parc. Tridon offers a wide range of flashers, including load sensitive and non load sensitive types.

Just enter your Rego or vehicle details into our website to find the correct flasher relay or can to suit your vehicle. To shop our whole range of flashers-relays, browse the Repco website or visit your local Repco store today and speak to one of our team.