Stanfred Car Ramps Set 850kg (Made in Australia) - CRS850-V3

Trust a quality Stanfred Car Ramps Set for safe vehicle elevation

Invest in a pair of quality car ramps from Stanfred to stand both the test of time and give you the confidence to work on your vehicle. Made in Australa, this car ramp set features heavy duty powder coated steel for rust protection coupled with conforming to the current AU & NZ safety standards.

Specifications:

• Weight: 14kg Pair
• Ramp Height: 185mm
• Ramp Length: 880mm
• Ramp Track Width: 210mm
• Max Tyre Diameter: 650mm
• Max Tyre Width: 200mm
• Working Load Limit: 850kg Per Ramp

Steps for correct car ramp use -

1. Always use car ramps on a hard level surface, such as concrete. Car ramps should always be used in pairs.
2. Confirm that the load / car to be applied does not exceed the working load limit of the vehicle ramps.
3. Conduct a pre-operational check of the car ramps to ensure no damage or broken components.
4. Check that no part of the underbody of the vehicle will foul as the car ramps are positioned.
5. Turn the wheels to a straight ahead position and place the car ramps against the tyres in such a way that each ramp is in line with the respective wheel.
6. Slowly drive the vehicle onto the ramp platform with guidance from a person outside the vehicle.
7. Once safely positioned on the car ramp apply the park brake of the vehicle.
8. Place a wheel chock under at least one of the wheels which is on the ground so that the vehicle cannot accidently roll off the ramps.
9. Car ramps should never be modified or accessories added.

Repco have not just an impressive range of car ramps, we also stock quality axle stands as well as trolley jacks to ensure that anytime you need to work on your vehicle you have the right equipment handy to keep it elevated and stable. Shop online or come instore and browse our ranges and ensure you are getting safe and durable equipment for the job.