Repco
Repco Hydraulic Separator Puller Set - RST290
SKU: A6294599
Features
- Features hydraulic ram, bearing separator, twin and triple head beam configuration, three leg sizes (100, 150 & 200mm)
- Designed for pulling and splitting a wide range of mechanical components like hubs, flanges, gears, and bearings
- Hydraulic ram: Rated capacity 4.5 Tonne, Maximum capacity 10 Tonne
Product Details
Repco Hydraulic Separator Puller Set
Freeing a seized hub or gear shouldn’t mean heat, hammers and collateral damage. The Repco Hydraulic Separator Puller Set gives you controlled force to remove press-fit components cleanly, protecting your vehicle and your knuckles. Whether you’re swapping a wheel bearing, servicing a diff, or tackling a stubborn flange, this hydraulic puller set delivers smooth, straight pulls so parts come off intact and seats stay true. It’s the smart way to recover time in the bay and avoid rework.
At the heart is a hydraulic ram rated at 4.5 tonne (10 tonne max) for serious muscle without shock-loading. The included bearing separator slips behind tight components where jaws can’t, while twin and triple head beam options adapt to symmetrical or awkward shapes. Choose from three leg sizes—100, 150 and 200mm—to match reach and spread on passenger vehicles, 4x4s and light commercials. The result is safe, controlled pulling and splitting of hubs, flanges, gears and bearings with less risk of damaging shafts, seals or housings.
Backed by Repco’s workshop-grade build, this is a go-to hydraulic gear puller set for anyone who values precision and productivity. Add it to your toolbox and make tough removals routine.
Questions And Answers
Bazaarvoice SAP Hybris Integration Version 2.8.0
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.0
Know How
Making sure you have the right torque to your suspension, engine, and drivetrain components are critical. If you do not use a torque wrench or use an inferior tool, you probably not getting the bolts tight enough or overtightening.
Learning to use a gear puller effectively is important, whether you’re removing small parts like bearings or larger components such as brake rotors.
With the right tool like this Repco Ball Joint separator, separating ball joints quick, easy and painless. Best of all this is a cost effective tool to have in your kit, and it’ll last for years.
If you’re doing work on your car’s suspension system, a coil spring compressor is an invaluable tool. Here’s a general guide on how to use one.
