No stores found - check that you entered a valid postcode or place name.

Parts added to cart

An item ({0}) for your deal is not available or does not match a selected vehicle

FITTING KIT

T&E Tools Pneumatic Dent Puller

$495 each

The pneumatic dent puller has 3 lbs (1.36kg) slide hammer and is fitted with a brass shut off valve
Supplied with three different size screw on suction pads
Simply select the correct size pad to remove the dent, apply shop air and use the slide hammer. Compressed air is exhausted through the handle and unit is fitted with 13 inch (330mm) inlet hose with 1/4 inch NPT air plug
Slide Hammer Length: 600mm
Pad Sizes:60, 120 & 150mm

Product Details

All T&E Tools are engineered and manufactured to the highest quality standards and are warranted to be free of defects in workmanship and materials.