Repco
Repco Thread Pitch Gauge 2 Piece - RST411
SKU: A6294597
Features
- Quickly determines thread pitch or TPI of screws, bolts, and tapped holes
- Narrow blade design works for both external and internal threads
- Metric: 0.5-0.6-0.7-0.75-0.8-27 and 0.9-1.0-1.25-1.5-1.75-28 mm
- SAE: 12-13-14-16-18-20 and 24-27-28-32-36-40 TPI
Product Details
Repco Thread Pitch Gauge 2 Piece
If you work on your vehicle, you know guessing thread sizes wastes time and risks damage. The Repco Thread Pitch Gauge gives you an instant, accurate read on thread pitch or TPI so you can match fasteners, choose the right tap or die and avoid cross-threading. It’s the fast way to identify unknown bolts, studs and tapped holes from the engine bay to the chassis.
This smart two-gauge set splits Metric and SAE for grab-and-go use. Slim, narrow blades nest neatly into internal threads and wrap cleanly around external threads, even in tight spaces, so you get a positive fit without pulling parts apart. In seconds you can confirm screws, bolts and fittings and get back to the actual repair instead of trial and error.
Coverage you can count on: Metric 0.5-0.6-0.7-0.75-0.8-27 and 0.9-1.0-1.25-1.5-1.75-28 mm; SAE 12-13-14-16-18-20 and 24-27-28-32-36-40 TPI. Built to Repco workshop standards, it’s compact and tough for the toolbox. Add this two-piece gauge to your kit to speed fastener ID, prevent stripped threads and keep jobs moving.
Questions And Answers
Bazaarvoice SAP Hybris Integration Version 2.8.0
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.0
Know How
Making sure you have the right torque to your suspension, engine, and drivetrain components are critical. If you do not use a torque wrench or use an inferior tool, you probably not getting the bolts tight enough or overtightening.
Learning to use a gear puller effectively is important, whether you’re removing small parts like bearings or larger components such as brake rotors.
With the right tool like this Repco Ball Joint separator, separating ball joints quick, easy and painless. Best of all this is a cost effective tool to have in your kit, and it’ll last for years.
If you’re doing work on your car’s suspension system, a coil spring compressor is an invaluable tool. Here’s a general guide on how to use one.
