Repco
Repco Angular Torque Gauge 1/2in Drive - RST206
SKU: A1226566
Features
- Easy-to-read scale
- Clearly visible angle indicator
- Adjustable arm and tightening knob for flexible scale settings
- 1/2" Dr. input and output square drives, compatible with both wrenches and sockets
Product Details
Repco Angular Torque Gauge 1/2in Drive
When your service manual calls for angle tightening after torque, this is the tool that keeps your build on-spec. The Repco Angular Torque Gauge takes the guesswork out of torque-to-yield and angle-set fasteners, so you achieve the correct clamp load on critical jobs like cylinder heads, main caps, suspension and drivetrain hardware. That means consistent results, fewer do-overs and greater confidence that your vehicle leaves the bay buttoned up right.
Its easy-to-read scale and clearly visible angle indicator let you set 30°, 90°, 180° and beyond at a glance, even when you’re working deep in the engine bay. An adjustable reaction arm with a positive tightening knob locks the gauge in position, keeping the dial steady while you turn the wrench for precise, repeatable angles. With 1/2" drive input and output square drives, it drops straight between your torque wrench and socket and plays nicely with the tools you already own.
Whether you’re building an engine, replacing stretch bolts or simply following modern OE procedures, this Repco specialty tool makes accurate angle tightening simple and reliable. Add it to your kit and protect your threads, components and hard-earned time on every job.
Questions And Answers
Bazaarvoice SAP Hybris Integration Version 2.8.0
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.0
Know How
Making sure you have the right torque to your suspension, engine, and drivetrain components are critical. If you do not use a torque wrench or use an inferior tool, you probably not getting the bolts tight enough or overtightening.
Learning to use a gear puller effectively is important, whether you’re removing small parts like bearings or larger components such as brake rotors.
With the right tool like this Repco Ball Joint separator, separating ball joints quick, easy and painless. Best of all this is a cost effective tool to have in your kit, and it’ll last for years.
If you’re doing work on your car’s suspension system, a coil spring compressor is an invaluable tool. Here’s a general guide on how to use one.
