Clutch Industries Clutch Alignment Tool - CAT105

Installing a new clutch can be a frustrating task, especially when dealing with the weight of a transmission beneath your car. The last thing you want is to redo the work because the clutch plate slipped out of alignment and won’t engage with the input shaft. To avoid this, use a clutch alignment tool. These simple tools, usually made of injection-molded plastic or nylon, are designed to ensure proper alignment and come in different sizes to match your transmission. The key is knowing the spline count on the input shaft—if the splines don’t align, the tool won’t work. Never try to use a tool that doesn’t fully engage the splines. If the tool doesn’t fit the pilot bearing or bushing correctly, it’s the wrong size, and you’ll need to find the right one. To use the tool, insert it into the clutch plate, making sure the clutch is facing the right direction and the tool passes through the splines. Place the clutch onto the flywheel and engage the alignment tool into the pilot bearing or bushing at the center of the crankshaft. Tighten the clutch against the flywheel, ensuring the tool stays securely in place. After installing the pressure plate, check that the tool remains properly seated. Once everything is tightened to spec, the alignment tool stays in the clutch until you’re ready to install the transmission. Always use the correct tool for your specific setup, as each application requires a different one.