Davies Craig Electric Water Pump - EWP150 Alloy Kit 12V - 8060

Davies Craig Electric Water Pump

Muscle up your engine cooling system with the Davies Craig EWP150 Alloy Electric Water Pump. Like all EWPs, this advanced unit is designed for remote mounting in the engine bay to satisfy those higher horsepower, turbocharged, supercharged and ‘worked’ engines which develop excessive heat. The compact EWP150 Alloy unit is manufactured with -AN16 (12) internal inlet and outlet threads for neat, tight screw-in fitting applications.This rugged alloy hi-flow electric water pump is designed to complement or replace the engine’s existing mechanical water pump. This essential performance accessory increases power to your vehicle’s drive wheels and improves coolant temperature control.

Combined with an LCD EWP/Fan Digital Controller (Sold separately Part #8002 or combo #8970) will manage both the EWP and Thermatic fan operation. The Digital Controller will vary the speed of the EWP in response to the engine’s coolant temperature. Multiple temperature settings are provided on the Controller for either maximum power or fuel efficiency. The Thermatic Fan/s will be activated automatically once the engine coolant rises 3°C above the targeted (set) temperature. The Digital Controller will automatically run on for three minutes (or to 10°C below the set temperature) after engine shut down, eliminating ‘heat soak’ and extending engine life. The EWP Digital Controller Combo is supplied in a do-it-yourself kit with everything you need for fitment to your vehicle’s engine, including an easy-to-follow DIY instruction booklet.

The world’s most advanced total engine cooling management system:

• Universal fit
• More power
• More cooling
• Increase fuel efficiency
• Extend engine life
• World-leading technology

EWP installation options:

• Installing an EWP as an auxiliary pump
• Disabling Mechanical water pump
• Disengaged mechanical water pump (recommended)
• Removed mechanical water pump (ideal)

In most cases EWP will be adequately supported by the radiator hose. Where mounting is required, the EWP must be soft mounted to protect against vibration. For the EWP115, EWP130 and EWP150 Part #8700 Mounting bracket is recommended.

When changing the water pump, we also recommend swapping out your coolant hoses, hose clamps and any other cooling related service parts. To maximise the longevity of your cooling system, its a good idea to run a coolant flush through the system too. Use the rego search function on the Repco website, or head into your local Repco store to view our range of water pumps to suit your vehicle.