Davies Craig Electric Water Pump - EWP115 Nylon Kit 12V - 8025

Davies Craig Electric Water Pump

The EWP115 Electric Water Pump - universal fit, do-it-yourself, easy to install water pump designed to replace or compliment your existing belt-driven mechanical water pump.

The EWP115 (115 litres per minute) pump is suitable for small, medium, large, high- performance and 4WD vehicles. It’s a performance product that improves engine cooling control and capacity whilst giving you more power and torque and improved fuel economy. The EWP115 is a practical alternative to the mechanical belt-driven pump or fitted as an auxiliary pump. Mechanical belt-driven water pumps run directly off the motor and sap engine power… the EWP115 is hardwired into your electrical system, by-passing the engine and releasing up to an additional 10kw (13hp). Combined with an LCD EWP/Fan Digital Controller (Sold separately Part #8002 or combo #8930) , the pump continues to run after you’ve switched off, eliminating “heat soak” and extending engine life.

Davies, Craig’s revolutionary, Australian-designed EWP pumps are made from anti-corrosive, lightweight nylon reinforced with fibreglass. Universal fit allows for easy mounting into the bottom radiator hose. Our kits come with easy-to-understand DIY instructions and everything you need for easy installation, including different adaptors to fit various hose sizes and all necessary electrical wiring.

An Electric Water Pump is one of the most economical way to increase horsepower and save on fuel consumption whilst caring for your engine. Used in conjunction with a Davies, Craig EWP header adaptor kit, it can replace the mechanical water pump completely.

The world’s most advanced total engine cooling management system:

• Universal fit
• More power
• More cooling
• Increase fuel efficiency
• Extend engine life
• World-leading technology

EWP installation options:

• Installing an EWP as an Auxiliary Pump
• Disabling Mechanical water pump
• Disengaged mechanical water pump (recommended)
• Removed mechanical water pump (ideal)

In most cases EWP will be adequately supported by the radiator hose. Where mounting is required, the EWP must be soft mounted to protect against vibration. For the EWP115, EWP130 and EWP150 Part #8700 Mounting bracket is recommended.

When changing the water pump, we also recommend swapping out your coolant hoses, hose clamps and any other cooling related service parts. To maximise the longevity of your cooling system, its a good idea to run a coolant flush through the system too. Use the rego search function on the Repco website, or head into your local Repco store to view our range of water pumps to suit your vehicle.