Parts added to cart
An item ({0}) for your deal is not available or does not match a selected vehicle
Brembo
Brembo Prime Composite Brake Rotor LH - 09.D094.13
SKU: A6313634
$486
each
Features
- OE-equivalent
- Bi-Material Composite two-piece
- PVT Ventilation - Better cooling & resistance to thermal cracking
- ECE-R90 certificate
- High carbon
- Fastening screws (Where applicable)
- Anti-corrosion UV paint coating
- Box contains a single rotor
^
Show More
Show Less
Product Details
Brembo Composite Brake Discs - The Original Product Quality
Brembo painted brake discs are synonymous with reliability.
The Brembo brake disc with special UV paint treatment guarantees superior corrosion resistance for the product, thanks to the protective coating on the outer edges and on the disc hub. The UV paint not only gives the disc a clean, shiny appearance but is also beneficial for the environment as the water-based UV paint treatment does not require the use of chemical solvents and is a low energy consumption process.
Technical Characteristics
The reduction of the vehicle weight and unsprung masses has been one of the primary objectives of car manufacturers in recent years, to handle the needs for greater reduction of consumption and emissions.
The aluminium hat of the Composite, Floating and Dual Cast discs and the steel hat of the Co-cast and Lightweight discs allow a ,weight reduction ,of the disc that can range ,from 15 to 30% ,compared to an integral one of the same dimensions.
If compared to the mass of the vehicle, this reduction may seem marginal. However, it actually has a significant impact on consumption, performance and handling of the car, since the disc is part of the vehicle’s unsprung masses.
,
The BMW range of composite discs, which is fully interchangeable with an Original Equipment brake disc, features an ,aluminium hub that is connected ,to the special cast iron braking surface ,by steel pins.
This technological solution is used on the latest top-performing BMW vehicle range.
This technological solution is used on the latest top-performing BMW vehicle range.
High Carbon - High damping coefficient
The perfect result of Brembo's concept of offering aftermarket products developed with the same parameters as the original equipment, High Carbon (HC) discs ensure comfort and low noise as the result of their high damping coefficient. This results from Brembo technology and the complete control of production in the company’s foundries allowing the variation of the chemical composition of cast iron by increasing the percentage of carbon in High Carbon (HC) discs. High Carbon (HC) discs are used for more than 1000 part numbers for cars and trucks.
PVT ventilation - Better cooling and resistance to thermal cracking
The Brembo patent for PVT ventilated brake discs improves the current design by using pillars instead of vanes in the ventilation chamber. The system improves the heat dissipation capacity and increases resistance to thermal cracks by more than 40%. The most notable innovations are increased resistance to cracks, greater heat exchange surface area and greater air turbulence.
Appearance
Metallised effect conferring a shiny, clean look to the disc.
Corrosion, humidity and temperature resistance
The resistance is superior to any other products on the market. Corrosion resistance is proven by tests in a salt spray chamber.
Eco-friendliness
The water-based UV varnish requires no solvents. The ultraviolet (UV) coating process is extremely energy-efficient.
Ready to use
Ready for installation and practical to assemble - no cleaning requried.
Braking surface protective coating
The protective varnish coating, also present on the braking surface, outer diameter and hub, ensures complete protection of the disc.
Box contains a single brake rotor
Questions And Answers
Bazaarvoice SAP Hybris Integration Version 2.8.0
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.0
