Your Selected Vehicle
Parts for your 2025 Suzuki Splash-Headlights
Repco by Century Car Battery Ultimate Performance 420CCA - DIN44LX MF
Explore 4WD & Adventure
LED Autolamps 12/24V LED Number Plate Light LED With 0.14M Lead (2 pce) - 30BLM
LED Autolamps Multi Volt Stop/Tail/Ind/Rev With Try Me Function Diffused Tail With Sequential Indicator Twin Blister - 385ARWM-2
LED Autolamps 12V Stop/Tail Strip Lamp With 10 Square LEDs Recessed Mount - 235R12
LED Autolamps 12V Stop/Tail/Indicator Lamp With Reflector 100x100x22mm - 101BAR
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse/Reflector LHS & RHS Diffused Tail Light - 284ARWM-2
LED Autolamps 12V LED Stop/Tail/Indicator Lamps With Reflector Twin Blister - 101BAR2
LED Autolamps 12V LED Stop/Tail/Indicator/Licence Plate Lamp with Reflex Reflector - 99ARL
LED Autolamps 12/24V Amber Marker Clear Lens Coloured LEDs Stainless Steel Bezel - 86AM
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Amber Red LED Light - 282ARWM
LED Autolamps 10/30V Rear Position Marker 2 Red LEDs With 40cm Wire Blister Pack - 58RM
LED Autolamps 12/24V LED Stop/Tail Lamp With Red Lens Round With Grommet/Plug - 113RMG
LED Autolamps 12/24V LED Stop/Tail/Indicator/Reverse Lamp 200x50x28mm Twin Blister - 200BIRSTME2
LED Autolamps 12V LED Boat Trailer Lamps Stop/Tail/Indicator with Licence Plate Lamp Light Left & Right Side, with 8m cable, Twin Blister - 209GARLP2/8M
2025 Suzuki Splash headlights — are they relevant?
Headlights are not relevant to a 2025 Suzuki Splash, because there isn’t a 2025 model of the Splash. Suzuki ended Splash production for Europe and most global markets in the mid-2010s, and the Indian-market sibling (Maruti Suzuki Ritz) wrapped up later in that decade. Any 2025-labelled Splash headlight listing is almost certainly a catalogue or SEO misfire rather than a genuine fitment for a current model year vehicle.
Technical sources support this. Suzuki’s published model histories and parts catalogues show the Splash as a past-generation compact hatch (late 2000s through mid‑2010s). Maruti Suzuki retired the Ritz thereafter. For road-legal vehicles, low/high-beam headlamps are mandatory under UNECE Regulation No. 48, Australia’s ADR 13/00 (Installation of Lighting and Light-signalling Devices), and New Zealand’s Land Transport Rule: Vehicle Lighting 2004—so if a 2025 Splash existed, it would need headlights by law. The key point: the vehicle itself doesn’t exist for MY2025, so there’s no factory “2025 Splash” headlight spec to seek out.
- Production reality: Splash ended globally around 2014 (with the Indian Ritz following later), so no 2025 model year exists.
- Catalogue clues: Genuine and aftermarket parts databases list headlamps only up to the final production years.
- What to buy instead: If someone owns a Splash, it’s almost certainly a 2008–2014 vehicle (or a Ritz in India). Shop headlights by VIN, build year, and market (RHD vs LHD), and match bulb type/levelling motor options.
Anyone landing on a “2025 Suzuki Splash headlights” page is usually chasing parts for an earlier Splash. To avoid wrong orders, they should confirm the exact year, market, and trim, then cross-check bulb technology (commonly halogen on most trims) and whether the car has manual or electric aim adjusters. That’ll keep the fit correct and keep the car compliant for Aussie and Kiwi roads.
FAQs
Does a 2025 Suzuki Splash actually exist?
There isn’t a 2025 model year Splash. The Splash finished production internationally in the mid‑2010s, and the related Maruti Ritz bowed out later. Any references to a 2025 Splash are not tied to a current Suzuki production vehicle.
I’ve found “2025 Splash headlights” for sale—are they legit?
Most likely they’re mislabelled. Sellers sometimes use broad year ranges or SEO-driven titles. If the car is a Splash, it’s typically from 2008–2014 (or a Ritz in India). Buy by VIN/build date and confirm right‑hand‑drive suitability for Australia and New Zealand.
What should a Splash owner check before ordering headlights?
They should verify market (AU/NZ vs EU), headlight type (halogen/projector), levelling motor presence, and RHD beam pattern. Matching these details to the VIN or OEM part number helps avoid returns and ensures compliance with ADR and NZ lighting rules.