Parts for your 2025 Mitsubishi Eclipse cross-Headlights

2025 Mitsubishi Eclipse Cross headlights

Headlights are absolutely fitted to the 2025 Mitsubishi Eclipse Cross. Mitsubishi Motors Australia specification sheets for the 2025 model year and the Eclipse Cross Owner’s Manual (MY24/25) list automatic headlights, LED daytime running lights and, on many grades, LED low/high beams with Auto High Beam. These systems are also there to meet Australian Design Rule (ADR) 13/00 lighting requirements and the NZ Transport Agency VIRM lighting standards. So, headlights aren’t just relevant to this model — they’re a core safety feature designed into every 2025 Eclipse Cross from the factory.

On this vehicle, the headlights are there to do two jobs brilliantly: help the driver see down the road and help everyone else see the vehicle. The LED units found on most AU/NZ 2025 variants deliver a bright, clean beam pattern for night driving, while the DRLs boost daytime visibility. Automatic light sensors switch the lamps on when it’s dark or raining, and selected trims add Auto High Beam to dip and raise the beams for oncoming traffic. Clear lenses and a controlled beam cut-off help reduce glare for other road users while keeping the forward view crisp and well defined.

As part of regular servicing, it’s smart to give the Eclipse Cross headlights a quick once-over. LEDs are typically long-life and low-maintenance, but they still benefit from clean lenses and correct aim. If a grade uses halogen bulbs in a specific market or fleet spec, those bulbs will eventually fade and should be replaced in pairs for even colour and brightness. After any front-end repair, suspension work, or if the car is loaded differently than usual, a headlight aim check is worthwhile to stay roadworthy (RWC/WOF) and avoid dazzling others.

• Wash lenses gently with pH-neutral car shampoo, avoid abrasive polishes that can haze the plastic.
• Inspect monthly: low beam, high beam and indicators — and check the beam against a wall from a few metres away.
• If condensation appears inside a lamp, have the seals inspected, persistent moisture can damage LEDs or bulbs.
• Halogen only: don’t touch the bulb glass, use gloves and replace both sides together.
• LED modules are generally not user-serviceable, if an LED fails, the headlamp assembly is usually replaced and the beam aim rechecked.
• Use ADR/NZTA-compliant parts, avoid over-wattage bulbs or unapproved LED retrofits that can cause glare or CANbus faults.

Access for bulb service (where applicable) is from under the bonnet via rear covers on the lamp housing. Expect roughly 0.5–1.0 hours per side for careful replacement and aiming. After any headlight work, confirm the beam pattern and that Auto High Beam (if fitted) functions correctly.

Are the 2025 Mitsubishi Eclipse Cross headlights LED?

Most AU/NZ 2025 Eclipse Cross variants feature LED low/high beams and LED DRLs, with Auto High Beam on selected trims. Market or fleet base specifications can vary, so the sure-fire way to confirm is to check the Owner’s Manual, the build plate, or the lamp markings on the housing.

Can owners replace the bulbs, or is it a sealed LED unit?

If the vehicle is fitted with full LED headlights, the light source is integrated and generally not user-serviceable, replacement is typically the complete headlamp assembly, followed by an aim check. Where a specific market grade uses halogen, the bulbs can be replaced individually — follow the manual for the correct bulb spec and access steps.

How often should headlight maintenance be done?

A quick function check monthly is ideal, with cleaning as needed. Have the aim checked annually, at tyre/suspension changes, or before WOF/RWC inspections. Replace halogen bulbs at the first sign of dimming or colour shift, LEDs usually last much longer but should be inspected if flicker or faults appear.